Russell King's latest activity
-
RRussell King replied to the thread A bit of an issue with aftermarket 3pt stabilize bars..Do not install the PTO shaft if it is too long! You can damage the tractor, implement or PTO shaft if you move the implement up or...
-
RRussell King replied to the thread L245DT questions: Clutch noise, high/low range lever replacement.Kubota has updated some of the part numbers over the years. On Messick’s site if you search for a part number they will be able to tell...
-
-
RRussell King replied to the thread Need help l4850 5cyl 2503di.@Mike Harrison You did not answer the questions above on what units of measurement you are using. Is the .2 in inches or in...
-
RRussell King replied to the thread L245DT questions: Clutch noise, high/low range lever replacement.You can get to illustrated parts lists at these sites: https://kpad.kubota.com/disclaimer?consumer_code=100faiXie8u...
-
RRussell King replied to the thread L245DT questions: Clutch noise, high/low range lever replacement.Post #2 and post #3 get you to the same person/company.
-
RRussell King replied to the thread L245DT questions: Clutch noise, high/low range lever replacement.For the squealing it is probably the throw out bearing but you can try one easy grease operation on the carrier for the throw out...
-
-
RRussell King replied to the thread B7100 removing crankshaft pulley with PTO adapter.Oh now I can see that it has not moved much and that is the pulley groove I thought was open space. As stated above you will need to...
-
RIn case anyone else is interested in the outcome of this, here's a PM I sent to bsabot69 yesterday and the response I received today: I...
-
RRussell King replied to the thread B7100 removing crankshaft pulley with PTO adapter.Can you see down the center of the removable shaft? What is there? I assume you would be seeing the splines of the crankshaft...
-
RThis what I have, it doesn't have a check valve so I'm assuming it restricts in both directions, which it does appear to do. I have the...
-
RRussell King replied to the thread Price for La243 loader?.The logic expressed above is that the loader may be 50% of the value of the tractor/loader package value. If you have the...
-
RRussell King replied to the thread Restrictor Valve Install.Unless you get the restrictor fittings mixed up with regular fittings and install the restrictor in the incorrect position. NOT that I...
-
RRussell King reacted to Smoke&Belles's post in the thread 2011 B2920 HST engine loses power with
Like.
I drained the fuel and had good flow out of the fuel filter. At my shop I removed air cleaner and had fuel cap off and ran engine and... -
RRussell King reacted to North Idaho Wolfman's post in the thread B7100D Rear Implements Drift Down with Like.
So you think the three point moves via magic pixie dust? :p :ROFLMAO: :ROFLMAO: :ROFLMAO: DO NOT open up the control valve and start...
-
RRussell King replied to the thread Switching Tire Types - L2501.You can not use the same wheels between most tire types. I “think” R4 and R14 tires are the only ones that could fit the same rims...
