GreensvilleJay's latest activity
-
GGreensvilleJay replied to the thread 2008 Kubota BX23 engine in BX25 Temp Gauge Stuck pinned HOT.I just use a properly sized bolt, drill 3/16" hole down the bolt head 'deep enough', 2 wires to DS unit,epoxy it in.wait a day to...
-
GGreensvilleJay replied to the thread Oil change "question".re: Part of me wants to change oil and filter prior to winter an then in spring This make no sense or cents to me. With maybe 30hrs...
-
GGreensvilleJay replied to the thread BX 1880 VS Gr2120.I'll play the 'devil'... WHY did the deck 'rust out' ? Were you cutting wet grass and never cleaned it after use ? I've got similar...
-
GGreensvilleJay replied to the thread Sunfire Heaters Anyone?.Any chance you've got natgas or propane in your house ? If so, spend the few bucks and run a line to garage then buy any 80KBTU 'house '...
-
GGreensvilleJay replied to the thread 2008 Kubota BX23 engine in BX25 Temp Gauge Stuck pinned HOT.ahh there's NO fun in that !!!I'd replace the Kubota sensor with a DS18B20 temp sensor, feed into a PIC microcontroller and uses a 4x20...
-
GGreensvilleJay replied to the thread Flickering LEDs.not really possible, LEDS ,being diodes, don't take kindly to 'reverse voltage' and poof, let out the 'magic smoke'. good LED lights(...
-
GGreensvilleJay replied to the thread BX2817.looking at the 2 links, I'll assume the skids are the same, made of UHMW with the trade name of TIVAR. The 'kit' is about $75 more...
-
GGreensvilleJay replied to the thread Flickering LEDs.You could add 100-250mfd caps in parallel at the LEDs. 'Flickering' could be the alternator 'noise' as it's not pure DC.
-
GGreensvilleJay replied to the thread 2008 Kubota BX23 engine in BX25 Temp Gauge Stuck pinned HOT.hmm, did the needle go back to 'cold' with the power off ? If so,gauge is OK. A 'super hot' reading indicates the sensor wire is...
-
GGreensvilleJay replied to the thread Dumper trailer choice.curious I downloaded the specs+parts lists. As for brakes, they probably use an 'off the shelf' spindles and hubs. Once you know that...
-
GGreensvilleJay replied to the thread Dumper trailer choice.single axle trailers can be 'tricky' when disconnecting from tractor,when not enough 'tongue weight' is there and can fling the tongue...
-
GGreensvilleJay replied to the thread Dumper trailer choice.tandem axle unit !!! wins hands down . As BAP says more stable, can disconnect and it NOT tip back. Agree brakes would be nice, can be...
-
GPersonally I’d want the one with tandem wheels for more stability
-
GGreensvilleJay replied to the thread BX2360 & Titan Chipper - Make Sense?.hmm, possible options 1) rent a chipper for a day. has to be cheaper than buying a chipper,storing it, etc. 2) make friends with an...
-
GGreensvilleJay replied to the thread Daily Chuckle.OK, HOW does it sense that the 'line' is 'dead' as the solar array is supplying power to the 'grid' or 'line'. To me it's a chicken and...
