Recent content by davidjack

Clutch switch or wires to it from keyed switch. Got her running by wire form keyed switch to solenoid. Now to figure what to do about the safety switch

Well, bypassed the safety switch and she runs. Thanks for your help. Now if I can figure out the switch. It must work like a solenoid that goes to ground. The manual calls for a .037 gap between the switch and a bar connected to engine. But I don't know if I gap it with the key off or on with...

Did get it to jump, put my wife in it to depress clutch, and it started right up. Only thing is, she never depressed the clutch. At least I have it where I can work on it now. Still won't start with the switch. I have a clutch safety switch also. Is there any way to disable It? Thanks for the...

Tractor stalled and wouldn't restart. Starter and solenoid work fine the bench. New battery. 13 volts to starter with key in off. 2 or so volts with key on. I can get only get the starter working with a separate cable from battery to starter terminal, but the thing won't fire up. Any ideas? I...

My starter shows 13 volts at the solenoid with key off. But only 2 or so volts with key on. I'm tracing a similar problem as Greg is. I'm just trying to jump it at this point to move it up to the shop