Help me out here...

Realtor

Member

Equipment
BX2380
Mar 19, 2024
19
26
13
Pensacola Fl
I've searched the Kubota sites. I can't find the weights of the following:

344 loader
54 inch drive over belly mower.

supposedly the BX2380 comes in at a weight of 1,433 Lbs.

I'm trying to figure out the total weight with the tractor, loader and the belly mower.

Thanks,
Jim
 

Bearcatrp

Well-known member

Equipment
BX1880 with loader, mower and 3 point
Mar 28, 2023
619
337
63
Minnesota
The 344 seems to be 132 lbs
 
  • Like
Reactions: 1 users

ken erickson

Well-known member

Equipment
B7100 hst, 2650 front mount snowblower, L2501 hst qa loader
Nov 21, 2010
1,147
1,855
113
Waupaca Wisconsin
The 344 seems to be 132 lbs
I think that 132 lbs is the bucket weight. Loaders net weight 478 lbs according to Tractor data.com.

kubota-la344-specs-review
 
  • Like
Reactions: 2 users

Realtor

Member

Equipment
BX2380
Mar 19, 2024
19
26
13
Pensacola Fl
thanks, I was on that one site, I just didnt read far enough.... Thanks, I also saw a page just now that said the 54 inch driver over was 210. that puts the tractor and all at 2121 lbs. I have a 3,500 axle trailer that gives me approx 1,380 for the trailer itself, and I don;t thnk its that heavy. thanks all!
 
  • Like
Reactions: 1 user

fried1765

Well-known member

Equipment
Kubota L48 TLB, Ford 1920 FEL, Ford 8N, SCAG Liberty Z, Gravely Pro.
Nov 14, 2019
7,843
5,066
113
Eastham, Ma
thanks, I was on that one site, I just didnt read far enough.... Thanks, I also saw a page just now that said the 54 inch driver over was 210. that puts the tractor and all at 2121 lbs. I have a 3,500 axle trailer that gives me approx 1,380 for the trailer itself, and I don;t thnk its that heavy. thanks all!
IMHO,.....too close for comfort!
 

DustyRusty

Well-known member

Equipment
2020 BX23S, BX2822 Snowblower, Curtis Deluxe Cab,
Nov 8, 2015
6,237
4,816
113
North East CT
How do you get the "ton of fill" out of the trailer? It looks like a lot of shoveling! :)
 

Ktrim

Well-known member

Equipment
B2400, lA352 loader,3pth quick hitch/z122r zero turn/restored 52 farmall super a
Dec 23, 2020
423
332
63
Nazareth Pa
Shovel, Shovel, and Shovel some more. 2 loads (total of 2 Tons) in one day.... Good times
How about drive up on trailer and use tractor bucket to unload ?????
 

Bearcatrp

Well-known member

Equipment
BX1880 with loader, mower and 3 point
Mar 28, 2023
619
337
63
Minnesota
Shovel, Shovel, and Shovel some more. 2 loads (total of 2 Tons) in one day.... Good times
I bought my 1880 to shovel. Screw hand shoveling. Use your tractor to unload before taking it to the dealer. By the way, unless you’re planning on leaving it attached, may go get it and put it on yourself. Got to learn sooner or later. I put mine back on for the 1st time a couple weeks ago. Not to bad.
 

Realtor

Member

Equipment
BX2380
Mar 19, 2024
19
26
13
Pensacola Fl
I bought my 1880 to shovel. Screw hand shoveling. Use your tractor to unload before taking it to the dealer. By the way, unless you’re planning on leaving it attached, may go get it and put it on yourself. Got to learn sooner or later. I put mine back on for the 1st time a couple weeks ago. Not to bad.

I'd like to get a little training, I do plan on leaving it attached during the summer months, but may remove for the winter months
 

Bearcatrp

Well-known member

Equipment
BX1880 with loader, mower and 3 point
Mar 28, 2023
619
337
63
Minnesota
check out the you tube videos. Better than reading the manual.
 
  • Like
Reactions: 1 user

WI_Hedgehog

Well-known member

Equipment
BX2370 (impliment details in Profile-About)
Apr 24, 2024
304
298
63
Milwaukee, Wisconsin, U.S.A.
The mower manual is quite detailed and explains every step in both words and pictures. I thought it was easy to get the mower on and off if following the procedures in the manual. I both removed and installed the mower on concrete and turned the deck wheels (per the instruction manual) to roll it out and back in which made it roll easily. The hard part was getting the PTO shaft to release my first time doing so as the previous owner "never" removed the mower and the shaft grease became thick.
 
  • Like
Reactions: 1 users

skeets

Well-known member

Equipment
BX 2360 /B2601
Oct 2, 2009
14,551
3,299
113
SW Pa
Shovel ohh thought yinz was talkin HD's
 
  • Haha
Reactions: 1 user

Realtor

Member

Equipment
BX2380
Mar 19, 2024
19
26
13
Pensacola Fl
The mower manual is quite detailed and explains every step in both words and pictures. I thought it was easy to get the mower on and off if following the procedures in the manual. I both removed and installed the mower on concrete and turned the deck wheels (per the instruction manual) to roll it out and back in which made it roll easily. The hard part was getting the PTO shaft to release my first time doing so as the previous owner "never" removed the mower and the shaft grease became thick.
I'm getting the drive over mower deck. I might not drive over it to attach and remove, but I'm not getting younger either.
 

WI_Hedgehog

Well-known member

Equipment
BX2370 (impliment details in Profile-About)
Apr 24, 2024
304
298
63
Milwaukee, Wisconsin, U.S.A.
I read here and saw a few YallTube videos saying the drive-over deck had some issues...just passing that on as I know no more than that.

I'm pretty close to retirement age, have a bad shoulder, stretched pinky tendon, bad hips, one bad knee, bad neck, and a bad back. (Sure ain't goin' to the grave "unused." 😂) That's why I "do the mower thing" on level, smooth concrete. Just passing that on....
 
  • Like
Reactions: 1 user