OK kids I have had it with that dayumed rubber mat on the B. I need some kind of good glue to hole it in place. I would leave it off but there are wires going through a wire loom under the mat, not a good design, but there ya go. SO the mat has to go back on and stay on, I almost took a header from it getting wadded up under my feet. So fire away kids and give me your ideas!
Good day…I’ve never pulled my mat up so I am not sure what’s really under there…it’s probably best I don’t know
. Before getting too happy with the throttle I’d recommend look into a product by 3M, called dual lock (sort of like an industrial grade of Velcro)…there are who knows how many types and grades for all kinds of applications. OEMs use this for everything from holding wires to holding in headliners in cars. It’s very functional but have to be careful to get correct application. My concern with the mat would be it might leave a bubble / upward imprint that you may not like.
The other option might be to look at how some OEMs secure the mats in their cars…some have learned from them holding the accelerator and they now have a little hook through hole.
If bolts / fasteners are out that leaves super glue or magnets….there are probably other ideas but that is what I can think of.
Any ways those are a couple things maybe for your considerations. Good luck.