L2800 Wiring diagram
- Thread starter Dooger2k
- Start date
Russell King
Well-known member
Lifetime Member
Equipment
L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop
Wiring is different depending upon what transmission you have.
Please advise.
You will have one safety switch that affects engine cranking. Clutch pedal or HST pedal.
Dave
When you turn the key, do you hear any "clicks"? My guess is the HST pedal did not return to center. Quick and easy, hold the key in the "On" position and rock the HST pedal backwards then forward and see if anything happens....
Son was blowing snow at Christmas, tried starting after no go. Glow plugs work, dash lights up but no click, no crank. Tried HST trick, nothing.
You have not done the important tests shown in my earlier post.
It is not suddenly going to fix itself.
There are more involved voltage drop tests you can be given but all require you to have a multi meter and know how to use it.
Dave
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Wish it was that simple. Have not had an opportunity to check out safety switches yet.
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
I know this the obvious thing…but that seat has a safety switch…which on mine needs to be banged once a year or so…so that it will start.
Turned out to be bad PTO safety witch. Jumpered and it fired up.
Thanks everybody
10 minute job to replace switch. Dealer call it a micro switch but nothing micro about price LOL
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Excellent job replacing it, and not just leaving it jumped!
Someone's life might depend on it working!