B26TLB not working in 2wd

[timefarmer]

Ok gents need some advise from the wise.
4wd works but back tires seemingly no power unless i use diff lock

Engage 2wd nothing unless i use diff lock

Tried left right brake with 2wd engaged. Hit right brake it goes forward hit left brake nothing. So it seems to me no right rear wheel power. Is this correct? Any other diagnosis i need to perform?
And what/how do i fix this?

 

[lugbolt]

broken axle or broken diff. Probably axle. Gonna have to pull it apart to find out.

 

[Edke6bnl]

that was the symptom I had when I broke a rear axle on my Kawasaki Mule.

 

[timefarmer]

broken axle or broken diff. Probably axle. Gonna have to pull it apart to find out.

Ok thats what i figured. Im sure pulling it apart is not easy as axle is behind frame on b26.
Can anyone post the rear axle section of the b26 workshop manual for me? I cant find the workshop manual online so a full document would be much appreciated!

 

[timefarmer]

Also another symptom i noticed.. in a super tight turn with 4wd on i hear a metal thunk sound from back right axle area

 

[fried1765]

Ok thats what i figured. Im sure pulling it apart is not easy as axle is behind frame on b26.
Can anyone post the rear axle section of the b26 workshop manual for me? I cant find the workshop manual online so a full document would be much appreciated!

This just might be the time to buy yourself a copy of the workshop manual!

 

[timefarmer]

This just might be the time to buy yourself a copy of the workshop manual!

Yea dealership wanted 80 bucks for one... me over here wondering why kubota doesnt just post pdf free. Not exactly stacked in cash around here

 

[timefarmer]

Personally a pdf copy would be better anyways as i can store it online and not lose it due to water fire grease etc... do they have a pdf available anywhere i have not been able to find one for sale or download from a legit looking source

 

[fried1765]

Yea dealership wanted 80 bucks for one... me over here wondering why kubota doesnt just post pdf free. Not exactly stacked in cash around here

$80 from your dealer is apparently a very good deal.
Cheapest USED one on E-Bay is $122.
New one on E-Bay is $199.

Though I don't need it often, (because Kubotas are reliable) I would not want to be muddling through a major repair on my Kubota L48 TLB without a WSM.
Access to one page or one paragraph, could prevent a costly mistake!

 

[timefarmer]

Kubota b26 rear axle manual thanks forums

 

[timefarmer]

How can i know if it is the rear axle or differential? Any diags?

 

[PoTreeBoy]

How can i know if it is the rear axle or differential? Any diags?

If it's the differential, pressing the brake wouldn't change its behavior.

 

[timefarmer]

If it's the differential, pressing the brake wouldn't change its behavior.

Thank you so confirmed axle?

 

[#40Fan]

From the looks of the .pdf file, if the axle was broken (snapped in two), it would have pulled itself out of the housing since it is only retained by the Cir-clip. Axle could still be damaged where the larger gear slips onto it. Could be the gear as well.

Looks like a fun job!

 

[timefarmer]

From the looks of the .pdf file, if the axle was broken (snapped in two), it would have pulled itself out of the housing since it is only retained by the Cir-clip. Axle could still be damaged where the larger gear slips onto it. Could be the gear as well.

Looks like a fun job!

Thanks any other tests or diags i could do to get more info before taking apart?

 

[MOOTS]

Here's pictures.

 

[timefarmer]

View attachment 88986
View attachment 88987
View attachment 88988
Here's pictures.

Thabk you any guess on which parts it might be?

 

[PoTreeBoy]

Are you taking a poll or working up the nerve to start? LOL

You're going to find the answer when you pull that axle case off. Be careful.

You can use the stabilizers to raise it up to get the tire and wheel off. Block it up. Drain the fluid, including plugs at the bull gear cases, assuming it has them. Then remove whatever's in the way and unbolt the case. Be careful, that stuff's heavy.

 

[MOOTS]

Thabk you any guess on which parts it might be?

No idea.

 

[timefarmer]

Are you taking a poll or working up the nerve to start? LOL

You're going to find the answer when you pull that axle case off. Be careful.

You can use the stabilizers to raise it up to get the tire and wheel off. Block it up. Drain the fluid, including plugs at the bull gear cases, assuming it has them. Then remove whatever's in the way and unbolt the case. Be careful, that stuff's heavy.

Just gathering info gonna be a few days before i have a space ready to pull it apart