Hammer and chain oil storage

[nbryan]

My B2650 oem tool box won't fit a hammer, or a 1 litre oil jug. The hammer is always useful for loosening and setting various attachment pins, etc. and my front snowblower chain oil has to go somewhere - and it found its spot! I think you'll need the BH77 backhoe subframe there to hold the bottle, but it actually fell in this spot one snowy day recently, and I left it there and it hasn't budged!



The cup holder slot hasn't dropped my hammer, either.

 

[SRG]

Get some sort of quick hitch setup, no hammer needed. Then use the cup holder for your quart of oil. Or for what it's really made to hold....beer.

 

[nbryan]

Get some sort of quick hitch setup, no hammer needed. Then use the cup holder for your quart of oil. Or for what it's really made to hold....beer.

The cup holder would't hold the oil jug, I tried! That's when it fell and landed where you see it in the picture now. Stays there.

The hammer is used for aligning the backhoe pins while connecting to sub-frame, and with a 1/4" round drift to loosen stubborn broken shear pins on the blower auger, tapping free frozen hydraulic line connectors.

 

[Tarmy]

I added this stuff to hold all kinds of things...

 

[SidecarFlip]

Don't have that issue. Everyone of my implements has it's own toolbox.