L2501 ROP height ?
- Thread starter Mudball
- Start date
Just pulled back in with a landscape rake on the back.... 90 1/4 inches with R4 tires at 30 psi on the back.. No Canopy.
Last edited:
Wow almost 8 foot.
I know it can be folded down but Im not sure how easy it is.
Now I will go measure my shed entrance height tomorrow morning.
Thanks for the info.
Yep, I got lucky as it just clears the entrance beam on the carport. Easy to spin the two bolts out after pulling the hairpins, and that gets you about 20 inches of clearance,,, enough to get pulled in further under my ceiling racks
It’s a bolt on each side so it’s not too bad.
I opted to put my bolts in the down position and bought two hitch pins (grade 5 1/2”. ) to use as a quick release since I have to drop the rops for my garage and shed any time I use the tractor
Yep, I got lucky as it just clears the entrance beam on the carport. Easy to spin the two bolts out after pulling the hairpins, and that gets you about 20 inches of clearance,,, enough to get pulled in further under my ceiling racks
Thanks for all the help and advice.
I just got back from the shed and with a varying dirt floor Im right at 8'-2" to 8'-4" so I should be good to go, thank goodness.
Thanks again
Poohbear
Active member
Equipment
L3301 HST, LA525, LP shredder, BB1566 box blade, QH10, Worksaver pallet fork
I forgot what I measured when buying but my L3301 with R4 tires clears my 7ft 10 1/2 in. opening with room to spare.