ZLi-225-D 4wheel drive

[mountndew1]

I have the tractor named in the thread. My welder caught it on fire and now I need some parts. Never had to do anything besides and oil filter which was a feet all in itself and a starter, two front tires and a fuel filter which was another whole process. So now I may need a wire harness and the whole are filter unit. Where in this world do I start to look for those type parts for this little gem of a tractor?
I appreciate any and all the help I can get as I really need this tractor back up and running ASAP as I use it on my farm at least once a week. Thanks for your help in advance.

 

[North Idaho Wolfman]

I have the tractor named in the thread. My welder caught it on fire and now I need some parts. Never had to do anything besides and oil filter which was a feet all in itself and a starter, two front tires and a fuel filter which was another whole process. So now I may need a wire harness and the whole are filter unit. Where in this world do I start to look for those type parts for this little gem of a tractor?
I appreciate any and all the help I can get as I really need this tractor back up and running ASAP as I use it on my farm at least once a week. Thanks for your help in advance.

Finding as wiring harness is probably an impossible feat in itself, you're probably better off rebuilding / rewiring what you have.
The wiring is very simple on these models.

What "filter unit" do you need?
You need to be a little more specific.
Fuel, motor oil, hydraulic oil, water, air???

 

[mountndew1]

Finding as wiring harness is probably an impossible feat in itself, you're probably better off rebuilding / rewiring what you have.
The wiring is very simple on these models.

What "filter unit" do you need?
You need to be a little more specific.
Fuel, motor oil, hydraulic oil, water, air???

Sorry about the lack of details. I guess I really wasn't expecting anyone to actually respond. My bad.
it's going to need the air filter housing and I'm sure I can get an air filter that will work. There is something that melted on the top that can't be made out and I don't remember having any picture of my own of that part of the motor area so I was looking up books and found a Japanese book and ordered the pdf download for it and figured I would just get google to translate anything written that I might need to know and don't you know they didn't send me the download link errr. It's looking like I will need a new fan blade too. hopefully can find that in an after market or something that will work. but it has a relay that burnt too and I need to figure out what that was for. So I really need to find a parts book that is for that make and model. Just found out today the tractor is between 37-39 yrs old. They made it to last and I don't work it to hard most of the time. It's been a heck of a good tractor to be honest haven't had to do anything to it to speak of.

 

[North Idaho Wolfman]

Sorry about the lack of details. I guess I really wasn't expecting anyone to actually respond. My bad.
it's going to need the air filter housing and I'm sure I can get an air filter that will work. There is something that melted on the top that can't be made out and I don't remember having any picture of my own of that part of the motor area so I was looking up books and found a Japanese book and ordered the pdf download for it and figured I would just get google to translate anything written that I might need to know and don't you know they didn't send me the download link errr. It's looking like I will need a new fan blade too. hopefully can find that in an after market or something that will work. but it has a relay that burnt too and I need to figure out what that was for. So I really need to find a parts book that is for that make and model. Just found out today the tractor is between 37-39 yrs old. They made it to last and I don't work it to hard most of the time. It's been a heck of a good tractor to be honest haven't had to do anything to it to speak of.

Either post or send me pictures of what you're looking at that you need to know.
I have a feeling that most if not all the parts are the same as an L2950, as that model had the same engine.
The wiring might even be the same and if that's the case I can get you prints of everything.
If you send me a lot of pictures of the damage I can tell you what to look at and what would need to be fixed.
There are a lot of parts that cross over if you know how to do it.

 

[North Idaho Wolfman]

Parts list:

Manual Kubota L1-225 | ZL1-225 parts list | Japanese

Complete parts list suitable for: Kubota L1-225, L1-225DT and other Sunshine models! Zen-noh ZL1-225, ZL1-225DT

shop4trac.com

But I would say save your money as the part numbers are going to be all wrong, as they updated all the part numbers years ago.

 

[mountndew1]

Parts list:

Manual Kubota L1-225 | ZL1-225 parts list | Japanese

Complete parts list suitable for: Kubota L1-225, L1-225DT and other Sunshine models! Zen-noh ZL1-225, ZL1-225DT

shop4trac.com

But I would say save your money as the part numbers are going to be all wrong, as they updated all the part numbers years ago.

That is a manual that I bought. However, they didn't send me the link to download it I paid for the pdf.
Ok I will get you pictures of it tomorrow. I tried to send you a video but it says its to big so I am trying to pull a few pics from that to send. But I will have good pics tomorrow. Thank you so much for trying to help. I just hope you can. :O)

 

[mountndew1]

I jsut found your email info I will try to send you the videos there. Thanks And as for the manuals I wanted pictures more than anything. :O)

 

[North Idaho Wolfman]

I jsut found your email info I will try to send you the videos there. Thanks And as for the manuals I wanted pictures more than anything. :O)

Yep looked at the Video, I'm pretty sure we can get you going with minimal grief and expense.

 

[mountndew1]

Yep looked at the Video, I'm pretty sure we can get you going with minimal grief and expense.

I just sent you a spec sheet I found a few yrs ago