Valve stem disappeared

EdwardsKev

New member

Equipment
Kubota B7610, Betstco Flail Mower, 5ft HOWSE bush hog
Mar 10, 2023
7
2
3
Spartanburg South Carolina
So today I had a bush hogging and at some point I noticed my front right tire was flat. So I thought, put some green slime in and keep on gettin it. Well upon further inspection I noticed the valve stem missing. I assume this is something that can be bought and replaced? Local tire shop or tractor place?

Also what is everyone doing to their tires? Foam filled front liquid in rear? Tubes vs tubeless? Spare ready to go on the trailer?
 

Attachments

Matt Ellerbee

Well-known member
Lifetime Member

Equipment
MX6000
Jun 27, 2019
1,800
2,034
113
Canton, Georgia
They make valve stems that can be inserted without breaking the bead, they are more for emergencies as they are pricey. Take wheel off and any local tire shop can fix you up for a few bucks. Or it can be done at home with some ingenuity.
 

jaxs

Well-known member

Equipment
B1750HST
Jun 22, 2023
551
292
63
Texas
Replacing stem might be the least of your problems,tire could be ruined from running flat. Take it to any tire shop for repair or call around for mobile tire service.
 
  • Like
Reactions: 1 user

DustyRusty

Well-known member

Equipment
2020 BX23S, BX2822 Snowblower, Curtis Deluxe Cab,
Nov 8, 2015
5,744
4,333
113
North East CT
Most likely the valve stem discentergrated from old age. You will also need to get a new tire to replace the old one because the side wall is damaged from running it flat. Might as well bite the bullet and buy to tires and put steel valve stems into the wheels. You can purchase steel valve stems on Amazon.
 

Daren Todd

Well-known member
Lifetime Member

Equipment
Massey Ferguson 1825E, Kubota Z121S, Box blade, Rotary Cutter
May 18, 2014
9,541
5,372
113
Vilonia, Arkansas
They make valve stems that can be inserted without breaking the bead, they are more for emergencies as they are pricey. Take wheel off and any local tire shop can fix you up for a few bucks. Or it can be done at home with some ingenuity.
Last time I had a tire patched. It was less than $20. Seems like it would be similar for a new valve stem installed.