Three point and hydraulics

beirutvet

New member
May 14, 2017
2
0
1
US
I was doing some clearing with a grapple, first major work of the season, and I noticed that my rear implement would not fully raise. It will go up and down but it will not raise more than about four inches. The grapple was fully functional. I'm getting ready to replace the fluid and filter in hopes that this will help. Any other suggestions?
 

TheOldHokie

Well-known member
Lifetime Member

Equipment
L3901/LA525, B7200DT/B1630, G2160/RCK60, G2460/RCK60
Apr 6, 2021
9,096
4,753
113
Myersville, MD
windyridgefarm.us
I was doing some clearing with a grapple, first major work of the season, and I noticed that my rear implement would not fully raise. It will go up and down but it will not raise more than about four inches. The grapple was fully functional. I'm getting ready to replace the fluid and filter in hopes that this will help. Any other suggestions?
Fluid and filter are not likely to help. This is commonly a sign the power beyond circuit is not (fully) connected. Some detail as to model of tractor and loader might get you a more specific suggestion.

Dan