Temperature guage

[Hoppy]

I recently acquired a kubota B7000 and would like to install a temperature gauge and was wondering if there is a threaded spot to mount the sensor. Any help would be greatly appreciated and pictures would be appreciated. Thank you

 

[GreensvilleJay]

FWIW..
maybe something like this will work for you ?

https://www.temu.com/ca/water-cooling-liquid-temperature-sensor-adapter-aluminum-alloy-connecting-pipe-radiator-sensor-adapter-for-temperature-sensor-and-instrument-radiator-hose-adapter-pipe-diameter-28mm-30mm-32mm-34mm-for-motorcycle-car-atv-engine-accessories-g-601099830350059.html?_oak_mp_inf=EOuh866n1ogBGiA4ZTMyNmYyODUyMWI0MGYxOTdiYjIwM2U5OTg1MDhlZiC%2F6ITBzzI%3D&top_gallery_url=https%3A%2F%2Fimg.kwcdn.com%2Fproduct%2Ffancy%2F833a0dbc-5bd9-4d4d-bb87-c82fc14f1183.jpg&spec_gallery_id=3104051307&refer_page_sn=10009&refer_source=0&freesia_scene=2&_oak_freesia_scene=2&_oak_rec_ext_1=NjEy&_oak_gallery_order=382010573%2C1632985820%2C503240275%2C89381180%2C1852620579&bottom_rec_bypass=%7B%22requestOptId%22%3A%22259%22%7D&search_key=radiator%20hose%20adapter&refer_page_el_sn=200049&_x_sessn_id=37d0kut05d&refer_page_name=search_result&refer_page_id=10009_1739329713987_3nzv3fu0cw

There are several variations( hose sizes and sensor ports).

 

[North Idaho Wolfman]

I recently acquired a kubota B7000 and would like to install a temperature gauge and was wondering if there is a threaded spot to mount the sensor. Any help would be greatly appreciated and pictures would be appreciated. Thank you

You'll need to use the above device put it in the upper radiator hose.
As there is no threaded ports in that system.

 

[billrigsby]

Being Thermo-Siphon and not under pressure,
I went right into the upper radiator hose,
works great.

 

[DaTow'd]

I drilled the top of my radiator and soldered in a brass NPT adapter that came with the mechanical gauge works fine

 

[billrigsby]

I did thin

I drilled the top of my radiator and soldered in a brass NPT adapter that came with the mechanical gauge works fine

I thought about that, but I did a restoration,
easier to replace the upper hose,
rather than a radiator to go back to 'original'.