Sunshine L1-245

[Bearville]

Well , been all over the wiring and have found nothing….the ram on th right side of the hitch works fine hydraulically with its manual switch , the control valve is under pressure , and I can lift the three point up and down by hand with no resistance!
But no hydraulic operation on the three point itself…

 

[Russell King]

Well , been all over the wiring and have found nothing….the ram on th right side of the hitch works fine hydraulically with its manual switch , the control valve is under pressure , and I can lift the three point up and down by hand with no resistance!
But no hydraulic operation on the three point itself…

There may be a push rod between the cylinder and the arms to move the arms. It may be missing, bent, broken, out of position?

I don’t even recall how to get to it but it is in line with the piston movement.

 

[Bearville]

Well , I’ve scrapped the monroematic and installed a simple joystick operating the lift solenoid 2 way valves…..
leaving the hydraulic ram on the one arm to give me level control…it works like a charm, very happy!