Need input please

[Hutchy]

Hi everyone, first time tractor owner; just purchased a 2016 BX2370, with 80hrs on it. It was working fine when I used it last week to unload a snowbloer implement from my trailer, but now the bucket won’t raise more than a foot or so? Hydraulic reservoir is full, i haven’t disconnected anything.. I’m wondering if the PRV is stuck open or something and how to test it?
Thanks in advance

 

[old and tired]

Put your 3 point hitch about halfway up/down... and see what happens. (if it works your feedback rod needs to be adjusted)

Next, if that wasn't it, disconnect and reset the hose connections to the FEL. To make sure they are truly connected.

If it's still not working and the curl is working fine, swap the lift and curl hoses to see if the problem moves with the hoses... let us know.

 

[Hutchy]

Put your 3 point hitch about halfway up/down... and see what happens. (if it works your feedback rod needs to be adjusted)

Next, if that wasn't it, disconnect and reset the hose connections to the FEL. To make sure they are truly connected.

If it's still not working and the curl is working fine, swap the lift and curl hoses to see if the problem moves with the hoses... let us know.

You’re right, the quick coupler somehow came disconnected? Had to play with lowering the bucket while playing either the collar to get it to seat.. TYVM for your input!