Was told the (a) knox sensor is bad. Where are they located on the m6-111. I have chased the wires behind the exhaust and go under the cab on the right side of center. I crawled under the tractor and they disappear. Any help is very appreciated.
M6-111 knox sensors
- Thread starter Grampy5
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Try NOX, pre and post.
At $2500, a sensor, you really should find out exactly which one of the two is bad.
And there is also mutiple versions of each sensor depending on serial number.
At $2500, a sensor, you really should find out exactly which one of the two is bad.
And there is also mutiple versions of each sensor depending on serial number.
Last edited: