lost backhoe swing action on kubota l48/BT1100 (no pressure) after full service and a hose replacement all else works fine any one with any feedback would be appreciated!
L48/BT1100 hydraulic issue.
- Thread starter Janestwo2
- Start date
Russell King
Well-known member
Lifetime Member
Equipment
L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop
Check that the new hoses are connected properly at both ends and that they are connected to the proper connection point at both ends. If there are quick disconnects anywhere on the backhoe, take them apart, clean them and reconnect them well. If the power line to the back hoe has a disconnect do the same and also the power line out of the backhoe
OntheRidge
Well-known member
Lifetime Member
Equipment
Kubota L47 TLB, Homestead 55" grapple, LP 1684 rear blade, WR Long 84" snowplow
If it is like my L47, there are 2 levers that must be in one position for BH, another for 3 point. Check those as well.
