L3010 Won't shutoff

houseinthewoods

New member

Equipment
L3010
Dec 22, 2011
1
0
0
Adamstown, MD
My l3010 will not shutoff unless you pull the shutoff knob. During running, the glow plug light is on much of the time, but sometimes turns off. The turn signals and hazard blinkers do not work, but the lights and brake lights work, the tractor starts normally. I have replaced the Shutoff solonoid and that did not help. There were two blown fuses, the bottom two (a 10 amp and 15 amp) I replaced them. All the wiring looks good, no mouse chewing. When you turn the key switch to the first position, but do not start the tractor, and then turn on a turn signal, you can hear the turn signal clicking but the lights do not light, but the lights themselves are fine (tested with a battery). When you start the engine, and hit the turn signal, you do not hear the clicking from the blinker. I assume that this is the timer relay for the starter solonoid, but could it be the culprit for all these problems? Or the glow plug relay or the glow plug controller? I see 4 things behind the dash that look like relays? Which is which? This is pretty cool I feel like I am on car talk!
Thanks
Phil
 

MrMoon

New member

Equipment
Kubota L3010
Mar 11, 2025
1
0
1
Virginia
I’m in the exact same boat with a 3010 as of a week ago. Absolutely baffling. Did you find something that worked for her?
 

PoTreeBoy

Well-known member
Lifetime Member

Equipment
L35 Ford 3930
Mar 24, 2020
2,963
1,624
113
WestTn/NoMs
I’m in the exact same boat with a 3010 as of a week ago. Absolutely baffling. Did you find something that worked for her?
Welcome aboard. Start a new thread, stating what the problem is, symptoms, when it started (accident, oil change, etc ), sounds, etc. I'm sure someone will get right on it

BTW, a WorkShop Manual free download is available at KubotaBooks.
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
32,018
7,757
113
Sandpoint, ID
Welcome aboard. Start a new thread, stating what the problem is, symptoms, when it started (accident, oil change, etc ), sounds, etc. I'm sure someone will get right on it

BTW, a WorkShop Manual free download is available at KubotaBooks.
He's got the WSM already. ;)
 
  • Like
Reactions: 1 user