L2502 QD couplers

[awesome]

Can someone confirm what types of QD couplers are used on the hydraulic hoses of the BH77?
The part diagram shows "Kubota NIPPLE, 3/8 NIP HNV28NPTM - 7J417-66220"

I believe these would be 3/8 iso7241-B. Correct?
I'm in Canada if that is useful to know.

 

[TheOldHokie]

Can someone confirm what types of QD couplers are used on the hydraulic hoses of the BH77?
The part diagram shows "Kubota NIPPLE, 3/8 NIP HNV28NPTM - 7J417-66220"

I believe these would be 3/8 iso7241-B. Correct?
I'm in Canada if that is useful to know.

Those are Faster HNV (ISO 7241B) couplers.

Dan

 

[Donystoy]

You should not have this issue if staying with Kubota fittings but when I converted my BH77 to pto pump driven hydraulics I had to use additional quick connects. The 3/8 male end that I tried to use looked identical to what was already on the tractor but just would not latch into the female end. I ended up purchasing one from the dealer which worked fine. All I can think of is that the tip of the male fitting would not push in quite far enough. Might have worked if I had filed a bit off the tip though.