front end bucket greasable pins

[springfieldnut]

I have a 2500 kubota with a frontend loader, the bucket is very used and bent terribly. I purchased another bucket from a man. I did not realize that the pin location was only like 4.25 inches long. The bucket i purchased has a 5 inch pin that needs to swapped for the 4.25. I need to find 5 inch long by 1 inch diameter greasable pins and possibly 3/4 spacers to use the new bucket. I called the local kubota dealer and they weren't able to help me. Anybody know where to find the pins or spacers.

 

[85Hokie]

may be too long

https://agpartsdirect.com/products/jd-542-loader-pivot-pin-replaces-part-w50671

 

[jaxs]

Size pins you need are readily available but if you can't find greaseable you might consider drilling zerk holes in housings.

 

[North Idaho Wolfman]

I have a 2500 kubota with a frontend loader, the bucket is very used and bent terribly. I purchased another bucket from a man. I did not realize that the pin location was only like 4.25 inches long. The bucket i purchased has a 5 inch pin that needs to swapped for the 4.25. I need to find 5 inch long by 1 inch diameter greasable pins and possibly 3/4 spacers to use the new bucket. I called the local kubota dealer and they weren't able to help me. Anybody know where to find the pins or spacers.

Do you know the part number of the bucket?