Dual Clutch Align and Setting tool (07916-90052). B2150D 4WD Manual Gearbox.

[Matt81150]

Ref: Dual Clutch Align and Setting tool (07916-90052). B2150D 4WD Manual Gearbox.

Hello and thanks for taking the time to read this post.

I am in the process of changing the dual clutches on my B2150D 4WD Manual gearbox - currently waiting on parts - and will need to align and set the discs when reinstalling them. The WSM shows Kubota Dual Clutch Align and Setting tool (07916-90052) as the tool to use.

I am unable to buy, beg or borrow this tool where I am located and was wondering if anyone has the dimensions or drawings or even photos that would allow one to be machined?

If fact for the clutch disc alignment I already have a tool I can use it is more the two pieces to allow measurement of the three release arms - this is a bar with various shoulders on and two discs which fit over it to allow measurement of the three release arms.

I am going to contact Kubota to see if they can provide anything but don’t hold out a lot of hope.

So, if anyone has any drawings or dimensions or even photos I would be very grateful.

I will add picture from the WSM to help explain what I mean.

If you got this far - thanks again for reading this. Matt.

 

[DustyRusty]

Here are some links that might help. Sad to say that one is on another tractor forum.

https://www.tractorbynet.com/forums/threads/ever-change-a-kubota-dual-stage-clutch.179472/

Setting up a Dual Plate Clutch ???

Since this is sort of a separate topic from the rebuilding the L345DT engine, I thought I would make it a separate thread. Today, I thought I'd simply take the dual stage clutch, discs, and flywheel to the Kubota dealer and save myself a lot of heartache by having them use their special tool...

www.orangetractortalks.com

Here is one for only $485 (US)

Genuine Kubota Clutch Tool Kit OTC 07916-55021 | eBay

Find many great new & used options and get the best deals for Genuine Kubota Clutch Tool Kit OTC 07916-55021 at the best online prices at eBay! Free shipping for many products!

www.ebay.com

Here is a Kubota dealer with one in stock ($361.72)

Kubota KIT METAL 07916-28752

Kubota KIT METAL Part 07916-28752 made by trusted manufacturers in the industry.

www.bahrns.com

 

[fried1765]

Here are some links that might help. Sad to say that one is on another tractor forum.

https://www.tractorbynet.com/forums/threads/ever-change-a-kubota-dual-stage-clutch.179472/

Setting up a Dual Plate Clutch ???

Since this is sort of a separate topic from the rebuilding the L345DT engine, I thought I would make it a separate thread. Today, I thought I'd simply take the dual stage clutch, discs, and flywheel to the Kubota dealer and save myself a lot of heartache by having them use their special tool...

www.orangetractortalks.com

Here is one for only $485 (US)

Genuine Kubota Clutch Tool Kit OTC 07916-55021 | eBay

Find many great new & used options and get the best deals for Genuine Kubota Clutch Tool Kit OTC 07916-55021 at the best online prices at eBay! Free shipping for many products!

www.ebay.com

Here is a Kubota dealer with one in stock ($361.72)

Kubota KIT METAL 07916-28752

Kubota KIT METAL Part 07916-28752 made by trusted manufacturers in the industry.

www.bahrns.com

Absolutely CRAZY pricing.....for a simple tool one time use tool that can be improvised.

 

[Matt81150]

Absolutely CRAZY pricing.....for a simple tool one time use tool that can be improvised.

I totally agree - that’s why it would be very helpful if the dimensions were published as with other Kubota special tools. I’m going to make the request with Kubota themselves but don’t hold out much hope …. worth a try though.

 

[North Idaho Wolfman]

Super Simple, Super Cheap fix; Got a hammer and a punch?

Drive out the roll pin, pull out the propeller shaft, and TADA shaft alignment tool!

 

[Matt81150]

Super Simple, Super Cheap fix; Got a hammer and a punch?

Drive out the roll pin, pull out the propeller shaft, and TADA shaft alignment tool!


View attachment 128116

Thanks and you are absolutely correct in what you say and show ( - I’m going to do exactly that for the alignment of the clutches - ) but I am talking specifically about the collar part that slides over the alignment tool to allow the setting of the “mutual difference of release lever” WSM page S2-12 and the “release lever height” WSM page S2-13. The collar has two sides to allow the two measurements. If I can find the tool dimensions I can either fabri-cobble one or at least do a rough check of the measurements….some how.

 

[fried1765]

Super Simple, Super Cheap fix; Got a hammer and a punch?

Drive out the roll pin, pull out the propeller shaft, and TADA shaft alignment tool!

View attachment 128116

I seem to recall, something that being what we did with my Ford 1920 clutch.

 

[DustyRusty]

I seem to recall, something that being what we did with my Ford 1920 clutch.

Nope, I was the one that worked on that car in 1926 and we just eyeballed it. How is it running?

 

[fried1765]

Nope, I was the one that worked on that car in 1926 and we just eyeballed it. How is it running?

How is my 1989 (Shibaura) Ford 1920 FEL running?
Beautifully,.......to date.
I just love that little bugger!

 

[Matt81150]

Nope, I was the one that worked on that car in 1926 and we just eyeballed it. How is it running?

Hilarious. But….does anyone have access (beg/borrow/etc) to this tool that could take some measurements to allow one to be made? I have contacted Kubota Japan with the same request but do not hold out a lot of hope, hence this forum…..anyone?