I want to buy a wood chipper for my bx but i noticed that the tractor shuts off when my tiller pto is turned on and you step off tractor. Is there a way to use PTO powered off mplements without someone sitting in the seat?
Disable Safety switch for PTO chipper attachment?
- Thread starter bgiff
- Start date
On the B2650 you have to set the parking brake on then you can get off the tractor. Maybe this is the same on your tractor.
From page 46 of your operators manual for BX23S:
Stationary PTO
To park the tractor and use the PTO system (for chipper
or pump, for example), start the PTO system in the
following steps.
1. Apply the parking brake and place blocks at the tires.
2. Make sure all shift levers are at "NEUTRAL", and start
the engine.
3. Set the PTO clutch lever to engage "ON".
4. Set the engine speed to provide recommended rear
PTO speed.
5. Unlock the seat lock lever and stand up and raise the
seat.
Stationary PTO
To park the tractor and use the PTO system (for chipper
or pump, for example), start the PTO system in the
following steps.
1. Apply the parking brake and place blocks at the tires.
2. Make sure all shift levers are at "NEUTRAL", and start
the engine.
3. Set the PTO clutch lever to engage "ON".
4. Set the engine speed to provide recommended rear
PTO speed.
5. Unlock the seat lock lever and stand up and raise the
seat.