New to Orange. New Holland class2 user for the past +20 years downsizing to the Kubota BX2380. Just ordered the tractor. The NH 3pt valve allowed setting it at anywhere within the range of movement and the implement maintained that position. Ignorant and a bit confused by the "positional" 3 pt on the BX. Forgot to ask the dealer. Already buried him with a list of questions that he patiently answered. From a few YTube videos covering the "x number of things I don't like" some have noted the "positional" 3 pt. Limited to either just 3 positions. Up, float, down?
BX2380 3 point operation.
- Thread starter Blue2Orange
- Start date
The 3 point will hold the position you leave it at; what it does not do is provide you with a repeatable height setting. On a BX you set the height by measure (if parked) or by sight while moving... I just eyeball it.
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
GreensvilleJay
Well-known member
Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
It's not 'draft' control where the hydraulics automatically raise/lower , say for plowing a field.
" Up, float, down? "
More like Up, Hold, Down. No position control to preset the "Hold" height. Takes some practice but you get used to it for most work. Grading with something like a box blade can be tricky.
More like Up, Hold, Down. No position control to preset the "Hold" height. Takes some practice but you get used to it for most work. Grading with something like a box blade can be tricky.
New tractor and new skills and "feel" to develop. Part of the fun.
Thanks everyone.