2012 Kubota L3800 repair manual

Jblac197 · Mar 29, 2019

Anybody know where I can find a repair/parts manual for a 2012 Kubota L3800? I want an actual book, found the ones I can download but much rather have a paper copy.

Sent from my SAMSUNG-SGH-I337 using Tapatalk

North Idaho Wolfman · Mar 29, 2019

Jblac197 said:
Anybody know where I can find a repair/parts manual for a 2012 Kubota L3800? I want an actual book, found the ones I can download but much rather have a paper copy.

Sent from my SAMSUNG-SGH-I337 using Tapatalk

Get it from a Kubota dealer.

Parts manual, P/N 97898-25000 $31.12

WSM (aka Service manual), P/N 9Y111-05201 $109.13

And FYI: These will just be the papers, you'll need to provide your own three ring binder to put them in.

Jim L. · Mar 30, 2019

The parts manual is good for getting a mental picture of what goes where.

Be aware that the part numbers in the paper manual may change, even multiple times, as vendors or improvements happen. So if you need to order a part, check for the latest part number.

Dave_eng · Apr 9, 2019

Jblac197 said:
Anybody know where I can find a repair/parts manual for a 2012 Kubota L3800? I want an actual book, found the ones I can download but much rather have a paper copy.

Sent from my SAMSUNG-SGH-I337 using Tapatalk

Since you are going to have to bind your own pages from Kubota, get a pdf, print it or have it printed and bound..

My very old paper manuals for Nuffields, eventually fall apart. Recently the expensive paper WSM from GM for my car, split down the middle of the binding.

In spite of what you pay, often the paper is low quality.

Another improvement offered by the electronic version, again using the L 2800, 3400 wsm:

The wiring diagram for the HST model is not complete. For example one wire going to starter. You have to refer back to the manual transmission wiring diagram to get a lot of the important details.

Electronically, you could have each wiring diagram on a split screen. with a paper manual you have to keep turning back pages.

This is the wiring for the manual transmission tractor

Dave

Fordtech86 · Apr 9, 2019

Dave_eng said:
Since you are going to have to bind your own pages from Kubota, get a pdf, print it or have it printed and bound..

My very old paper manuals for Nuffields, eventually fall apart. Recently the expensive paper WSM from GM for my car, split down the middle of the binding.

In spite of what you pay, often the paper is low quality.

Another improvement offered by the electronic version, again using the L 2800, 3400 wsm:

The wiring diagram for the HST model is not complete. For example one wire going to starter. You have to refer back to the manual transmission wiring diagram to get a lot of the important details.

Electronically, you could have each wiring diagram on a split screen. with a paper manual you have to keep turning back pages.

This is the wiring for the manual transmission tractor

Dave

You wore the GM manual out?

You are working on that thing way too much

.....just messing with you

Dave_eng · Apr 10, 2019

Fordtech86 said:
You wore the GM manual out? You are working on that thing way too much.....just messing with you

Actually, it is a Toyota in disguise. A Pontiac Vibe built in the California plant along with Toyota Matrix's. The same plant were Tesla's are now built. Nummi was the plant name.

Dave

Search

2012 Kubota L3800 repair manual

Jblac197

New member

North Idaho Wolfman

Moderator

Jim L.

Active member

Dave_eng

Well-known member

Fordtech86

Well-known member

Dave_eng

Well-known member