Got My Titan Pallet Forks Today

billrigsby · Aug 25, 2017

Fed-X just dropped them off, Disappointed

....

But it was short lived, I guess they could have painted the tips GREEN

All in all - Very well made and for $101.74 can't complain about the bad choice of paint on the tips !

Just need to find a set of chain binders.

RCW · Aug 25, 2017

Very nice, Bill!!

I got a similar pair from Titan a couple years ago. Great deal at the time, too, but don't remember the $$ amount. I probably bought the wrong ones for the tractor.

Mine are longer - which isn't good for a BX. Been thinking of cutting them back to something like you have.

Do you know what each fork weighs? What is the working length of the fork itself?

Think mine are ~50 lbs each and 46 or 48" working length.

Lighter version had less robust clamp and still weighed 45. My clamp looks like yours - more heavy-duty.

Mine are great and very well made - just a little too much for a BX sometimes - and I don't want to shorten the forks too much.

jnldr · Aug 25, 2017

Got mine but haven't put them on, will tomorrow perhaps.
Seem well made....

huntfishquest.com

dalola · Aug 25, 2017

I got a set for my BX as well......definitely over-kill! But I can't fault a company for making heavy-duty stuff.

I wish someone made a light duty "brush spear" attachment for the BX....think 6 or 7 tines, maybe 30-40" long, mounted to a single bar that would bolt or clamp to the bucket. Something you could scoop up smaller brush piles with. I'd be all over that!

D2Cat · Aug 25, 2017

Here's a rake/mover I made about 20 years ago for a B8200. The ears fit over the loader bucket. Bucket had a 2" ball on the top where most have a hook. The come-a-long has a loop welded on the end that fit over the ball and then tighten the come-s-long snug. Works fine. Easy to make. Used old barbells cut off at angles.

sdk1968 · Aug 25, 2017

got mine yesterday...

took me a minute to figure out what you didnt like. LMAO

slow on the uptake today...

pretty sure they weigh 35lbs each as the package said 70lbs on it when they dropped it off.

VERY happy with them for the $$ & thank you to the fine member here who told all of us about them!

FUSE · Aug 26, 2017

I recently came across a set at northern tool where the whole pallet fork attachment weighs 100 lbs. quik load or load quip or something was the brand. For my bx I have a set of titans but they weigh almost 300lbs...the bx runs out of lift capacity quick, so these lighter ones are worth a shot. kubota wanted around $1k for theirs, I think I paid around $300

Yooper · Aug 26, 2017

Gotta love a guy with a can of Orange paint!

ipz2222 · Aug 26, 2017

Then I'd be loooovveed. I have 12 cans of orange!!!

RCW · Aug 27, 2017

dalola said:
I got a set for my BX as well......definitely over-kill! But I can't fault a company for making heavy-duty stuff.

sdk1968 said:
got mine yesterday...

took me a minute to figure out what you didnt like.
pretty sure they weigh 35lbs each as the package said 70lbs on it when they dropped it off.

Not trying to hi-jack Bill's thread, but can you guys post photos of your forks? Would like to see the clamp especially, too. Also dimensions would be great!

Guessing Bill's are 2x3"? Is that correct, Bill? (And sorry for the 'jack)

Bought mine a couple years ago, so don't remember much. Seems ~$160 or so with the center bracket. Mine are 2x4x48" working length of the forks, 50 lbs each, with a heavier clamp than another model @ 45 lbs each. I wanted the heavier-style clamp.

The 50 lbs isn't as big a deal as the 48". Knew it was overkill at the time, just didn't realize how much.

Like dalola said - not Titan's problem - they are VERY well-made! Thinking of cutting mine back to 36".

RCW · Aug 27, 2017

rcw said:
not trying to hi-jack bill's thread, but can you guys post photos of your forks? Would like to see the clamp especially, too. Also dimensions would be great!

Guessing bill's are 2x3"? Is that correct, bill? (and sorry for the 'jack)

bought mine a couple years ago, so don't remember much. Seems ~$160 or so with the center bracket. Mine are 2x4x48" working length of the forks, 50 lbs each, with a heavier clamp than another model @ 45 lbs each. I wanted the heavier-style clamp.

The 50 lbs isn't as big a deal as the 48". Knew it was overkill at the time, just didn't realize how much.

Like dalola said - not titan's problem - they are very well-made! Thinking of cutting mine back to 36".

never mind - just bought a set of the 2x3x30" forks!

Will just put a longer bolt in the other 2x4" stabilizer bar!

sdk1968 · Aug 27, 2017

just locked up & came in ...

can get you a pic tomorrow if ya want..

its a big ole bolt with a 1" rod welded on it. these are plenty sturdy for no more than my little 2601 will lift on the front end.

RCW · Aug 27, 2017

sdk1968 said:
just locked up & came in ...

can get you a pic tomorrow if ya want..

Don't bother, but thanks for the offer. Have another set coming more suited to my tractor. 2x3x30" at 30 lbs each.

Not Titan's issue - I'm an idiot sometimes......

sdk1968 · Aug 27, 2017

too late!

as good as this forum is to me... i took the phone out & got you that picture!

no way i was gonna make you wait.

RCW · Aug 28, 2017

sdk1968 said:
too late!

as good as this forum is to me... i took the phone out & got you that picture!

no way i was gonna make you wait.

Hey, thanks!

Mine will be delivered tomorrow - very quick. Says package weight is 60lbs. Much better than I had...

Figure for $100, just get a better-sized set....again, that was my doing....

Delmar · Aug 29, 2017

RCW: what forks did you order? Even the smaller Titan ones might be overkill for a little BX.

RCW · Aug 30, 2017

Delmar said:
RCW: what forks did you order? Even the smaller Titan ones might be overkill for a little BX.

I got these. 30" working length with 2x3" tube. 30 lbs each.

I think these will work fine for what I need.

My others already have a buyer.

Sent from my iPhone using Tapatalk

dalola · Aug 30, 2017

D2Cat, that is kind of what I was thinking....maybe even less heavy-duty that that, yours looks pretty heavy. If I ever get time to piddle, I may try to make something of my own. Thanks for the pix!

D2Cat · Aug 30, 2017

Dalola, your welcome. It's made with part and pieces I had laying around.

I use it for a lot of things, from a manure fork to setting a pressure washer or stump grinder on to load on a PU. Just last week I used it on my L4240 to get under an air conditioner pad to move it and the condensing unit out of the way for a project.

Vidiot · Aug 31, 2017

I bought the 43" LW Clamp on Pallet Forks specifically to unload a pallet with a 250lb LP blade (long story), my BX didn't even break a sweat.
Not sure of any other uses, but I'm sure I'll find something!

Got My Titan Pallet Forks Today

Well-known member

Attachments

Well-known member

New member

Member

Well-known member

Attachments

Active member

Member

Well-known member

Active member

Well-known member

Well-known member

Active member

Well-known member

Active member

Attachments

Well-known member

Member

Well-known member

Member

Well-known member

Member