L3130 oil leak

Bebo12249

New member

Equipment
M6800 L3130 ZD326
Dec 28, 2018
6
0
0
Canton, MS
A new novice here. I have a L3130 with 900 hrs. Bought the tractor recently and changed all fluids, then used for about 30 hours. Today while clipping the oil light came on and it took a gallon to top off level. Ran for another 15 minutes and although the oil light didn’t come back on, the oil barely touched the bottom of the stick. The motor appears to have very fresh oil on the front. Any comments or suggestions are greatly appreciated. Thanks.
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
28,605
5,066
113
Sandpoint, ID
Your talking motor oil right. :confused:
Most common is the oil filter is not seated.
All I can say is find the leak, check the PLUGS too!
 

Bebo12249

New member

Equipment
M6800 L3130 ZD326
Dec 28, 2018
6
0
0
Canton, MS
Yes, motor oil leak. Hope it’s that simple. I’ll look closer tomorrow with day light. Thanks for your suggestion. Bill
 

Bebo12249

New member

Equipment
M6800 L3130 ZD326
Dec 28, 2018
6
0
0
Canton, MS
No apparent leak at filter or plugs. But from where the oil is and from conversation with nearby K dealer, it may be the front engine seal. That will send a field mechanic to assess. Thanks..