Old and dumb

Steve67

Active member

Equipment
B2601-fel, 60"mmm, 5' rear blade, balast box
Jan 20, 2017
323
102
43
St. Louis, mo.
I swear the older I get the dumber I get. Just spent 45 minutes cutting grass with the brakes on, had ear protection on so I didn’t hear the hst tranny screaming. I guess the tranny suffered a little extra wear :mad:
 

Stmar

Active member

Equipment
B2650HSDC
May 23, 2017
906
42
28
Buffalo, Wyoming
Join the club. When the guy brought my tractor we went through the basics and then he told me to take it over to the blade so we could practice changing FEL and blade with the SSQA. My first impression was "Man this thing has no power". Then I realized the brake was on.
 

GeoHorn

Well-known member
Lifetime Member

Equipment
M4700DT, LA1002FEL, Ferguson5-8B Compactor-Roller, 10KDumpTrailer, RTV-X900
May 18, 2018
5,686
3,012
113
Texas
I'm often tempted to install a switch and a flashing-light in the dash for when the brake is applied.
 

Muzzy

Member
Lifetime Member

Equipment
B2650HSDC
Feb 13, 2019
274
4
18
WNY
B2601 got me good, was hauling large rocks on the pallet forks across the land, wondered why the heck she was pulling so hard, go figure, parking brake could not have been pushed down and set any harder
 

D2Cat

Well-known member
Lifetime Member

Equipment
L305DT, B7100HST, TG1860, TG1860D, L4240
Mar 27, 2014
12,985
4,365
113
40 miles south of Kansas City
A nice feature on my 10 year old Polaris Ranger is when the parking brake is set, the engine is in limp mode until released. You're not going until you release it.
 

SRG

New member

Equipment
B8200D 4WD........ JD 870, FWA, 300x FEL.......... JD 797, 72" Z-Trak
Jul 15, 2017
490
3
0
N. IL
Everyone does it.
I gave up on using the parking brakes unless I absolutely have to, because i've dove around with it on too many times myself. Mine even has an indicator on the dash:eek::eek:
 

Donystoy

Active member

Equipment
LX2610HSDCC, B/H, Loader, plus numerous other attachments. B7200 sold
Dec 10, 2013
497
160
43
Binbrook, Ontario
Anyone who has never admitted doing anything stupid is either a liar or has never done anything. The first day I got my tractor I slid sideways into the ditch by the road. Tried to get out but just didn't have enough power. Ended up calling a tow truck. That night in bed I thought, you idiot! I had it in high range. And I was only 35 then.
 

Captain13

Active member

Equipment
M7040 4WD ROPS, ZD28, Woods (84” box blade, 72” harrow, 48” pallet forks)
Feb 27, 2019
516
168
43
Kathleen, GA
I have left the brake on and I'm sure (positive) most, if not all Kubota owners have done the same.

Since doing that, the first thing I do when I get on the tractor is hit the brake pedal and then test the parking brake lever to make sure it's off. I rarely use the parking brake so I have to do something to make sure I release it when I do.
 

Stmar

Active member

Equipment
B2650HSDC
May 23, 2017
906
42
28
Buffalo, Wyoming
On the bright side at least the Kubota has brakes, you should have seen my 8Ns. Those babies had very little brake no matter what you did, I have stood up on the brake pedal with very little response in difficult situations. I do find myself not applying the parking brake on my Kubota most of the time, just ground the back blade and FEL/snow blade.
 

Orangeglow

Active member

Equipment
2015 BX2370
Jun 19, 2014
317
144
43
Prescott, Ontario
On my BX2370, whenever I set the brake, I set it on hard enough that if I try to move the tractor with it on, I can feel and hear the different HST whine right away. Their is no possible way to move the tractor with it on. Are you guys just setting the brake on very gently, therefore allowing the tractor to move ?
 

leoric

Member

Equipment
B2650 since 2018. BH77, LA534, Forks, 60" Bucket, 60" Mid mount mower
Mar 13, 2019
76
0
6
Indianapolis
On my BX2370, whenever I set the brake, I set it on hard enough that if I try to move the tractor with it on, I can feel and hear the different HST whine right away. Their is no possible way to move the tractor with it on. Are you guys just setting the brake on very gently, therefore allowing the tractor to move ?
This is what I try to do as well. If you're in low 4x4 in mud/sand I've still moved a little bit before I noticed it because I expected resistance and was in low. I agree though 99% of the time this solves my forgetfulness.
 

mike paulson

Member
Jan 11, 2012
226
24
18
ulster, NY
I carry my 500 dollar chain saw in the bucket then dump it on the concrete floor when putting away my tractor. Even scooped a full bucket of gravel with that poor saw in the bucket
 

dirtydeed

Well-known member
Lifetime Member

Equipment
B2650 BH77, U27-4R2, BX23TLBM, box blade, rear blade, flail mower, Stump Grinder
Dec 8, 2017
2,873
3,167
113
Wind Gap, PA
I carry my 500 dollar chain saw in the bucket then dump it on the concrete floor when putting away my tractor. Even scooped a full bucket of gravel with that poor saw in the bucket
Been guilty of dumping tools on the floor too...but not the other. That doesn't sound like fun.
 

sandiegomark

New member

Equipment
B6000 B206 FEL, Gannon box, hauling, loading
Apr 27, 2019
12
0
1
SPRING VALLEY
:) You don't have to be old to be dumb. In fact us old guys are wise because we admit it and learn from our mistakes. Cheers
 

Newlyme

Active member
Lifetime Member

Equipment
M4900 w/loader, finish mower, tiller, auger, rake. BX24 w/loader, backhoe
May 27, 2015
633
63
28
Nelson Ohio USA
I thought there was an older thread on this very subject already.
I am not admitting on two threads I have done this.

Oops.
:p
 

SidecarFlip

Banned

Equipment
M9000HDCC3, M9000HD, Kubota GS850 Sidekick
Oct 28, 2018
7,197
546
83
USA
I added an idiot light to remind this idiot to release the brake. Used a leaf switch acting on the brake pedals. For the life of me I never understood why Kubota didn't equip all it's tractors with a bake on idiot light.

I doubt you hut the brakes or the HST. The brakes are wet brakes and the HST just worked a bit harder....:eek:
 

rbargeron

Well-known member
Lifetime Member

Equipment
L5450, L48, L3250, L345 never enough attachments
Jul 6, 2015
1,148
219
63
western ma
I swear the older I get the dumber I get. Just spent 45 minutes cutting grass with the brakes on, had ear protection on so I didn***8217;t hear the hst tranny screaming. I guess the tranny suffered a little extra wear :mad:
Except for heating up the hydraulic fluid, it probably didn't cause wear on anything, even the brakes are immersed.

My list of dumb stuff gets longer every day :rolleyes:
 
Last edited: