I have an L2900 with a fluid leak where the tube from the hydraulic filter enters the transmission. Will I have to remove the filter assembly to replace the O ring?
L2900 hydraulic leak
- Thread starter Smitch
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Yes I do believe so.
EDIT: No you shouldn't have to remove the filter housing to fix it.
EDIT: No you shouldn't have to remove the filter housing to fix it.
Attachments
Last edited:
Yes the filter assembly will have to be partially removed. The tube where it enters the transmission (suction tube assembly-040) is rigid-and won't come out far enough unless you remove the 2 bolts (020) that hold the filter assembly (010) to the case. Then you should have enough slack to pull it from the transmission housing.