Search results

Thanks guys. Yes I have a cab and I already bought the factory switch, I found the factory harness and plugged it in. I will be using my tractor in the winter for plowing my driveway, it came with the B2749 two way plow. My plan is to mount the factory front lights in the rear and get new...

I just changed the hydro oil and both filters on my new to me B2650. I used kubota filters and UDT2 fluid. I'm amazed at how much quieter it is with the new fluid. Big improvement inside the cab I can easily hear the radio now. I also changed the front axle fluid and used UDT2. Air filter...

I will definitely pull the tank as soon as I have a chance. Hopefully it's not to hard to get out. I changed the engine oil today, T6 rotella 5w-40 and a kubota filter. I also fixed the pedal not returning to center. It was the shaft that the pedal pivots on. It was dirty and a little...

Just used it to move all the attachments around and it's running great. The only other issue is the HST pedal does not return to center. I checked all linkage and it looks cleaned, lubed and move freely. Looks like there is a hydraulic cylinder, small shock, connected to the linkage, is that...

Update, it runs. Bought a new fuel filter and orings. Siphon the diesel from the tank, and it looked pretty clean. A couple of small pieces of debris in the paint filter i used to filter the diesel before going in the fuel can.. Pulled fuel line from the tank to the filter housing, and it was...

Thanks for the reply guys, I won't have achance now to look at it until late tonight, but I will have all day tomorrow to work on. I'll post pictures and results of what I find.

No it didnt, i didnt know there was one, is that the problem?

It idled down then died.

Just bought a 2013 b2650 today. I had to drive 3 hours to get it. Ran great the entire time I tested everything at the guys house. I get home and after about 10 minutes it stalls out and runs rough when I restart it. Seems fuel related, I add a few gallons of diesel but no luck. Did I...