Search results

That the loader. After reading your reply, it was the rod on the loader control valve I hit. Don't know why it started to lift again. But after reading you first reply got me thinking why should it start working again. Had me stump until my Dad ask me a simple question. What did I do to it...

I did the testing like you said, Don't know if the gauge was good. Borrowed it from a friend, only got 1800psi and sometimes 1900psi on the gauge. My friend think his gauge is a little off. Anyway here a new twist to the problem. After doing the test, and reconnecting and making sure everything...

Hello all, I need some help with my old tractor hydraulics. Like the title say I have a b6200hst 4wd that I love. Here the problem, the front loader no longer seems to have the power to lift a full bucket. I had someone tell me, that one or two of the hydraulic rams was passing fluid, and that...

Thanks for the Info, tried to find something like you were talking about. But no luck, and found out that there are 6 of those hose's, not 4. 5 they sell and 1 has been discontinued. Don't know what to do about that one. Its the hose coming from the Hydraulic block to the pump.

Hi all, on my B6200hst there are 4 short little rubber hose about 5 inches long that connect the Hydraulic piping to the cooler and guess cut off block. Looked up the parts and they list 2 different part number, and they want $17 each for the 4 of them. My question is can I just go and buy some...

Wondering if there a safe way to force anything out of the lift cylinder's. Raising the fel to max height and undo one line on one cylinder and then lowering. Forcing out any junk in the cylinder? Rinse and repeat for the other lift cylinder. Also flush the connected line out at the same time...

Didn't use any type of sealant, no leaks, Only replaced the 4 lines going to the Fel from control lever box, the 3 coming from tractor haven't been replaced yet, so I guess there a total of 7 lines. Only the ones going to fel replaced, worked fine and then start slowly over a period of a week...

hmmm, I didn't use Teflon tape on the fittings, heard bad thing about it with hydraulic fluid. The Fel worked fine after replacing the lines from the control box to it, there are only 4 lines coming out of the control box to the Fel. It worked fine, but started losing lifting power over a...

Hello everyone, I own my b6200hst for a few months now and run into a little problem. The Fel is losing its lifting ability. Started after replacing all the Lines leading from the control box to the Fel. I had a Line blow out on me and decide that all the lines needed replacing, No telling how...

Tractor didn't have those , but saw a few on the tractor at the Kubota junk yard, thought they were just regular washers that were bent out of shape from over tightening. Guess I will have to find some new ones and put them on the stud after cutting new threads, as the threads to the inside nut...

After reading your post and doing a search for the throttle problem and fix for a BX tractor, went to a Kubota junk yard. Found out that I was missing the second Nut on the stud that the rod "lever" mounts to. Went Back home and found out that the Stub is stripped were the nut is. Like someone...

I'm using the WSM online, come to find out that the online WSM is missing a lot of things. Order the WSM today and was amazed to find out how big it is compared to the online version. I have used Kubota illustrated Parts guide but it doesn't show exactly the setup illustrated I need. Anyway went...

Hello all, I been running my b6200hst off and on for about a week now trying to fix all the little problem it has. I have two really annoying problems, First the throttle Lever wont stay in position. I move the throttle lever forward and get the tractor up to 2500rpm and start moving forward...

Just looked at my screen, bad news is its not snapped together. The plates are factory pinch wielded together every few inches. I would suggest maybe drilling hole and use rivets to attach the plates to the screen. sorry I couldn't be more help.

I looked at the Diagrams for your tractor and the screen your referring to is about the same on my b6200hst, just slide's in front of the radiator. there are only 2 plates on the screen that are attached, bottom and top. The 2 on the side and the bottom (not attached to screen) are actually...

Hi all, Just rewired my B6200hst and Im new to owning it. I have a few questions about the ignition on it. I cant remember reading anything about the key position. I know that once I start it and its running, that I can move the key to the off position and it will keep running. But does the...

Sorry to not have replied to this post. Was in the hospital with pneumonia. Got back and read yall posting and decide. I had enough laying around and feeling sick. So went out and put the tractor in the shop. I grounded out the oil pressure switch wire with the motor running and the key on and...

Hi all, Just rewired a b6200hst. Got it without any wiring harness. Have it running and driving and charging but I think I wired the Oil Pressure switch wrong. When I turn the key on both charging and oil light come on, When starting and running both lights go out. I wasn't sure if I had the...

Well Dave, got the charging system working and your right didn't need the headlights at all. Didn't even wire them up, going to make that a stand-alone harness when I get the rest of little bugs that keep popping up fixed. Hour meter died... Had the Glow plug system figured out first, had to...

Thanks guys one step closer, but I still have one Problem didn't count on. Have no Instruments (idiot lights missing, the hole OK-monitor thing is what Kubota dealer told me its called.) So have no way to wire up that part of that system up as yet and I have no head lights to run off the new...