Search results

My first fail to start and tick me off issue with my L2501. Would not turn over nothing lights worked, dash worked. But no start. Thought for sure battery, though battery indicated good. Got a new one, still no start just click. Thought must be an interlock or fuse. Checked those no issues...

I have a Landpride QH15 and Landpride RCR1260. On LPs website the writeup for the QH15 says: Optional top link is required for implements that have a swiveling top link. This keeps the top link attached when going through ditches. This must be used on the following models (site list the RCR 12...

So I want to make a carry all for wood tools weight etc. This will be on a L2501HST. Decided on a King Kutter carry all from Northern tools My questions are: 1. How wide do you make it, to cover the full track of the rear tires or alittle shorter? 2. What size boards 2x10, 2x12, 2x6 pressure...

Good day, I have a L2501/HST/FEL with rotary cutter and box blade. To haul it all what size trailer should I be looking for? Tow vehicle is a Chevy 2500HD/crewcab/4wd -- like to stick with a dove tail type trailer to keep down additional cost.

I have had my L2501/HST/4WD setting on flat concrete at my basement driveway for a week. Waiting on rain to pass over to do a light install and other projects got in the way. Today I peeked at the tranny sight glass(hump in the middle of floor pan, sight glass on drivers side) its just white no...

I have an L2501HST with a Landpride QH15. My question is do you use spacers on the lower pins of the 3pt implement? I have a LP RCR1260 and LP BOXBLADE both cat 1 implements. I didn't use the spacers or carter pins when I had the cutter hooked up. But thought I would ask the question.

Will the TITAN 4000LB clamp on pallet forks fit over my installed PTB this is for a L2501? That's a good price they got on them right now. But I don't want to pull my PTB if I don't have to clamp on the pallet forks. Thanks

So how did you guys attach the Kens bolt on hooks for a QA bucket. I order the back to back kit for grab hook and clevis got 3 of them. But the bolts are way to short. and inside bucket angle vs top plate angle would not allow tightening up the clevis to inside bucket and hook on the top plate...

I got my new L2501 with FEL/QA bucket, 5ft LP rotary cutter and 5LP boxblade. I have a lot of 1-3 inch saplings to remove. What toothbar do you guys recommend? I have run over some with the bucket but seems I get more skimming and pushing down on the saplings than I do cutting and digging out...

Greetings from East TN. I was ready to buy a BX2370 but then saw the B2601. Both would have a FEL, 60inMMM, brushgard, R4 filled tires, 4ft box blade and 4ft bush hog(to start with). I have 20acres 3-4 of which is mowing, additional 2acres for bushhog work(at the moment). The rest is mature...