Search results

not yet! Fixed relay and hooked back up. No change. Took wire bundle apart and main power line splice was toast. Fixed that. Now I have nice power at the gauges. Still no start though. Directly connected relay that powers the solenoid. I can start with the key fine but have to manually turn the...

UPDATE: pulled the wire harness. One of the three relays under the seat had a corroded and broken wire as can be seen in the video. I assume this was the issue. It appeared to have a large red and small red wire both connected to that corroded place. I cut the remainder off so I can clean them...

thanks for the assistance. Yeah I’ve had my fingers deep in the c channel on that brake switch. Checking with a multimeter all the safety switches seem to operate correctly. I’ve even disabled some (just seat, brake and pto) with no change. While tracing the wire to the solenoid (black with...

I appreciate the effort. Thank you sir

Battery is a solid 13.change and load tests well on a tester. For good measure jumpered it to my backhoe. No change. I have it on jack stand for all this testing to be safe

does the shop manual help?https://drive.google.com/file/d/1rEWfCTC18iHXJk8Nniqb0ZqwGPqcA0bZ/view?usp=drivesdk

It will start and run fine when jumped. It won’t stop when the key is removed though if that helps

Hello. My ZD221 zero turn won’t start. Battery is good. I have good voltage at the starter. I tested the solenoid and it appears good. I’ve gone through the two lever safety switches, the seat safety switch, the pto/mower engage safety switch and the brake safety switch. I get variable and...

Hello, I just got a BX25D, and added a thumb to the backhoe. I noticed there is what appears to be a mount point for a hydraulic cylinder (or could be used as one). Anyone do anything with this? Why is it there?