Search results

I recently acquired a T1760 with 235 hours on it. I want to change the transmission fluid. I know I have to pull the trans out to fully drain it. You can half change it with the plug on the side, maybe I should just half change it a few times. My question is what fluid to put in it? I can’t...

Well udt is like a 20w and sudt2 is a 10w Hmm we sell 50w synthetic at work.... Sdt——does udt or sudt2 have ep properties? I didnt know of a hydro oil that did, but could learn something today....

I hadn’t planned on corn head. As stated, tractor supply sells “00” grease made by super s. It comes in a plastic quart bottle like gear oil. I’m sure if I cut grass then pulled the plug it would run out. “00” is supposed to flow, I haven’t tried it. Do you have anything with a mid mount mower...

I think udt or gear oil is fine, unless something happens. I’m sure I’m paranoid enough I’ll be fine. If anything I probably do way more maintenance than is necessary.

I live in mid Mississippi, I cut at night sometimes. But in the day it can reach high 90’s. In the deep summer it’ll be mid 80’s at night. I will sell the ZG20 eventually. Until then I will use it.

SDT————because as I said, I have heard a lot of horror stories from folks I know personally. I don’t want to have to go in or replace a box. AND I came here asking advice/experience. Wolfman———so you say use the 00? Any brand? Tractor supply? Or another? Reviews are good on it.

I do not have any leaks at this time, BUT, I’ve heard too many horror stories from people I know, so I am being cautious. Friend at work had a G2160 box go out, $800 later he runs the semi fluid I talked about.

I have several Kubota mowers, they all have a deck gearbox. 2 i know have gear oil in them. Kubota says SAE80-SAE90 OR UDT or SUDT2, I put 75-90 synthetic in one and 80w90 in the other. Gearbox 3, i do not know what is in it. I just acquired it. Multiple people tell me to put 00 grease in...

I bought the sudt2. It was $57 something for 2.5 gallons. I will probably get another when I change the tractor again. It won’t be enough though. The ZD21 will hold close to 2 gallons, the B7500 holds 3.3 gallons.

I have 2 dealers local, later that day, I called the closest and they carry it. The parts guy acted like it doesn’t sell very well. BUT they did have it in stock. I think I will go with SUDT2 the next change in the B7500, the ZD21 I will change soon as I just got it.

I need help deciding what oil to use in my Kubota equipment I have a B7500 with front loader and i just acquired a ZD21 When i got the B7500 I immediately change the hydro fluid(150 hrs) to Kubota UDT(what they sold me local) I noticed the hydro makes more “whine” than the day i got it. A...

That's what I thought too.

Im with philztoyz, look at the fan, maybe even unbolt it and crank it. i do assume the buzzing sound is what you mean? Check the shroud for missing paint, feel the ends of the blades.

So far I really like the increase in pressure. I will load the rear tires soon.

This was so easy it wasn't funny. On the lowest part of the valve there is a 22 mm plug. Take it out, the spring and a silver piece come out. Stack shims under spring. I stopped at 2300psi semi cold. It's probably 65f and I only let it run just a minute. I added 350-400psi. It is raining here...

I did not get a chance to do anything to it today, but did notice the bucket has been up since Saturday about 2 ft off the ground. That makes me think the cylinders are not leaking or bypassing internally. The bucket has never leaked down when I left it up. I guess when I get a chance I will...

I agree, it almost never pulls a rear tire unless on a hill with the rear uphill, and even then not to often. Rear tires are not loaded. 3pth seems fine lift wise, 5 ft disc is effortless to lift. I know it's not to heavy but... I don't have a problem shiming it to at least 2200, but I...

I think it is 7 lines, 3 in and 4 to the loader.

4 lines I think, total I'm not sure, but I don't have 2200, i checked it cold and got around 1900, i will recheck with warmer fluid this weekend or tomorrow if I get a chance. I don't have any leaks, you can hear it bypass when you try to do the stuff I am talking about.

Hello all! First post. I usually lurk and search, but can't find my answer. I have a 2003 B7500 with the LA272 loader on it. It's weak IMO. I have checked pressure and want to bump it a little up to around 2200psi. I do believe that's what the LA302 loader pressure was. Or does anybody think...