Search results

Re: La450 fel cynilder kit? Took one of each cylinder off this afternoon and removed all the internals. I am happy to say that everything regarding the shafts and cylinders looked brand new. And why the one was leaking is obvious, the last or outer seal was dry-rotted. There was slight wear on...

Re: La450 fel cynilder kit? thanks coachgeo. i wished to have the parts in hand when we tear the cylinders down. i guess we may have to tear one down and take it to a shop to match parts.

Hey guys, I am trying to find an illustrated parts list for the subject FEL. I need to rebuild all four cylinders. Does anyone know how to find it? It's hard navigating Kubotas documents; haven't had any luck there, maybe I just don't know how to search it well enough. Thanks in advance for...

OK..... I don't have blinkers. Got everything working with one exception. In trying to figure the headlight issue out I took the boot and bulbs out of the headlight, now I can't get the deadgums things back on! I have tried everything I know including putting grease on the boot and around the...

Thanks Daren, I did download the parts manual and will order the shop manual later..... boy coulda used the shop manual the last month! LOL

BINGO! That was exactly what it was, both hooked to one light. I switched the wires and everything is working fine! Thank you..... that was a mystery to me. Still trying to figure the tail lights?turn signals out.......... there is no mention of turn signals in the electrical diagram just...

Thanks for both of your quick replies! Never thought of that on the head lights!! We'll check the wires. Where might the blinker controller be?

We have a L2550. Just replaced the combination switch for the lights because in either of the two settings only one light comes on. Its odd because in the high beam selection one light comes on and in the low beam selection the other light comes on...... both lights will not burn in either of...

bump......

OK, we have everything working as it should except for the glow plug indicator. We have power from the switch to the indicator; we have power through the indicator to the glow plug in that we can feel the area at the plug getting hot but the indicator wont get hot? Is that even possible? Seems...

It is the solenoid and/or the timer relay. In addition to the glow plug I am wondering what type engine this is? The serial number is D1402-DI-A-17619. Tractor data says the engine is Kubota; did Kubota manufacture these or are they Deutz engines? Someone told me I could readily find parts at...

Yes I am, thank you for the clarification. Great we'll start there. Any ideas on the glow plug?

Guys I need a hand. We own a L2550 and a B6100. The starter switch on the L2550 hasn't cut the tractor off since we owned it back in March; we use the decompression knob to cut the tractor off as the previous owner instructed. We are now making many small repairs to the L2550, one of which is...

Yep, sharpened the blades, changed to first gear PTO, WOT and it cut down all the thick, tall grass with tractor in 1st gear without hesitation. The rest we cut in PTO 1st gear and the tractor in 3rd and 4th gear with no issues whatsoever! Thanks for all the comments and suggestions, we really...

OK guys, thanks for the feedback. Update: Yesterday, with the deck as high as the shims (roughly 6" blade height) would allow in 1' tall thick fescue with mixed wheat and rye about 2' tall and the tractor in first gear, PTO in second gear, WOT it still knocked out on me a few times in 30...

Hey guys, wondering if someone could help me with the few questions and comments above and one other thing: Using the B6100 and the Rhino finish mower yesterday in some higher grass, I could tell it was alot on the tractor but it pushed through. However, at a certain point I think either the...

The only other thing worth mentioning; right now the mower is pretty low because the wheels are so worn. We have all the shims on the bottom. We have new wheels to put on hopefully this weekend. That being said, when we get to higher and thicker grass the engine does noticeably work harder but...

Hey Guys, My Dad and me purchased B6100 last winter and finally got it running good recently. Along with it came the subject finish mower and front weights. I see in the manual where it says "Roatary Mower, rear/mid, 48". I have a few questions: (edit) 4WD, manual transmission, tractor tires...

OK Hoke...... as much as I hate to I said I would post back to let you know what I found out. We ran the tractor for about 15 minutes and brought it back inside the shop (level ground) to check the fluid. No change so we began to think we may have miss-counted the quarts since we were filling...

Thanks Hoke! Will do and report back.