Search results

I believe your right about the npt fittings, I don't have any extra fittings handy to try, I'll have to get some, I appreciate your help!

I found their specs, I'm not sure really what it is supposed to be

Looks to be a 7/8, one thing though is will something like this seal off in this particular valve since the small hole is threaded? Seems to me like this valve may not be right for this tractor?

What i ordered was a p40, but no telling if they sent the right one, I will try to contact them and see if they can verify the part number, googling the part number it says p40 and p80 on the same page

No luck, all the ports are too small, I put a threaded plug in the small hole inside the lower port and I now have pressure to front and rear, but... the 3 point went all the way up and stuck, seems mechanically stuck at the top, I have the knob opened up and won't budge

Kimllier store on amazon, none of the ports are labeled on the valve so no I'm not 100% sure, front loader works though

It's one joystick handle, the pb sleeve i purchased from Amazon for 17 bucks, so I should just buy the right control valve and end my frustration lol

Thread size is bigger than the port, not sure if the picture helps

Ok thank you! One more thing, any idea how I can find out what power beyond it requires with no part number on the block? I contacted vevor and they were no help without a part number.

Can you show me which to ports to plug? And will I still need a power beyond sleeve? I have a p40 i bought from Amazon but it's too big

Edit: does not look like it will accept a power beyond fitting

I have a b2400 with l351 loader that bought split in half. I finally got it all together and have no 3 point function, the loader valve was replaced with a vevor that has no numbers on it. I pulled the fitting out of the n port and it does look like it will accept a power beyond fitting, it...