Search results

This is similar to my M4D-071 but the owner's manual specifies to fill only from the large plug/holes on the Right Hand and Left Hand front diffs until oil runs out the small check hole on the axle.

I recently purchased a new Kubota M4D-071 tractor built last week of December 2022. I now have 6 hours on it and saw this article and bolted over to my storage shed to check the front axle fluid. It was very low. It took just under 3 qts of Super UDT-2 fluid to fill. So, some tractors are...

I do similar to bambam31. Park the tractor with front wheels off the asphalt while rear wheels are on asphalt helps to elevate rear of mower deck. Then place two 2x6 planks under the deck like shown in bambam31 photo above. I've never removed my blades to sharpen. Just use an angle grinder...

I had an L245DT for many years. Bought it new in 1978 and never had an issue after 14 yrs when I traded. Good luck with yours.

Item is sold.

Anybody?? Make offer if interested.

For sale is a copy of the Kubota Workshop Manual for M6800, M8200, and M9000 models. I purchased this manual new in August 2010 to troubleshoot an A/C problem (used once). Included also is the Ultra Cab II Supplement for the M6800, M8200, and M9000. Manual is in like new condition in a nice...

Depending on what is missing you may need the whole compression release assembly. The compression release knob has a spring loaded return mechanism. The idea is to get the engine cranking fast with no compression (compression release pulled out) and then let go of the knob and she fires right...

I agree the L245DT is a very capable tractor for it's size. I bought a new one in 1979 and used it for 14 years. It was still going strong when I traded for a larger Kubota. The L245DT has two starting aids for cold weather -- glow plugs and compression release. I used both when...

HELP!! Anybody out there have an M series tractor with hydraulic shuttle shift? I suspect the clutch adjustment is same or similar.

I have an M8200 cab tractor with hydraulic shuttle shift which I bought new in 2004 and my operators manual does not cover the clutch adjustment. Is there no adjustment on these critters? The tractor only has 310 hrs on it and there seems to be very little free play when depressing the clutch.