Search results

" If you input equal pressure to both ports on a cylinder, the extend function will always work as you have more volume and thus more force acting on the extend." That info explains why the dump worked on the curl command. Both ports were at 2800# pressure at same time so the dump worked...

Did a pressure check on valve. When joystick was pulled over, both sides of valve had 2800# of pressure. One side should have been 0.

Yep, all hoses have been checked multiple times. Only thing we can figure is a defect in control valve. Loader is new, taken off of a cab tractor. Checking to see if might be some warranty.

Yes, works but backwards.

Yes, have swapped lines, put lift in place of curl, same situation. Up/down works, if you swap the hoses all it will do is go up on both functions side to side. It appears that the problem is on one side of the valve. Thank you all for your input. Sorry, standard valve. not the self leveling.

Yes, have checked several times, more than one person and Kubota website.

Swapped the hoses on the quick connect dash, top two are the bucket controls. When swapped bucket action would only dump. Loader still raises and lowers fine.

Hello, new to the forum and need some help. Have recently purchased a LA1353A loader that came off of a M9540 cab tractor and have put it on a M9540 open station tractor. Installation no problem, joystick function up and down fine, but the tilt on the bucket is backwards. Pull joystick toward...