Loader for bx1850v
- Thread starter kbfarm
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
You have a BX1850D not bx1850v
There are 2 loaders that fit it.
LA203 and LA240
Both are going to be incredibly hard to find just the loader.
You would be better off selling what you have and buying a model with a loader already on it.
There are 2 loaders that fit it.
LA203 and LA240
Both are going to be incredibly hard to find just the loader.
You would be better off selling what you have and buying a model with a loader already on it.
xrocketengineer
Well-known member
Lifetime Member
Equipment
BX1880, FEL, Grapple, 36 in. Forks, 48in. MMM, Quick Spade, Ripper
Unless this works there too, even though the chassis is shorter:
The la243 and la344 loader will also work on your bx1850. If your tractor is not loader ready with the valve and joystick already on it you'll have to get all that as well. The hydraulic steel lines from hydraulic block to valve are shorter than the bx23xx or bx26xx as the chassis is shorter. I have valves and joysticks. La344 youll have to remove the hydraulic plate and put quick disconnects on the hoses. None of these loaders are easy to find though