Recent content by wddot

I sanded the paint off so I could read the numbers. I just checked the pressure thanks. It read between 2500 to 2575psi The relief valve is working so I'm thinking the Ram's diameter is just to small.

Thanks Dave this is the 3rd time in less than 20 minutes of operation. I had a 2in stop installed in the cylinder the last time I had it straightened but it didn't help. I'm trying to remove red tip bushes not oak trees. Very disappointed any advice would be greatly appreciated

L3240 Thanks Dave

Re: Bucket cylinder pressure?? Thanks. I'm trying to check how much pressure I've got going to that particular cylinder which keeps bending

Anybody have any idea what's the max pressure on a BH75 bucket cylinder? Thanks for the help

Thanks for the info. Do you have a bh75?

Recently purchased a 3240 with the Bh75 B-hoe (very low hours) This is the 3rd time the bucket cylinder has bent with less than ten minutes of usage trying to dig up red tip bushes. Had a machine shop straighten and put a two inch stop to reduce travel but cylinder bent again. Local dealer says...