Soopitup's latest activity

  • Soopitup
    Soopitup replied to the thread BX 2370.
    Off the top of my head, on the 80 series there's an injector service and maybe a pump service or check due at 2000 hours? How often has...
  • Soopitup
    Soopitup replied to the thread BX Service Intervals.
    End of season should be fine. Service intervals are very rarely required to be done at the *exact* time stated. You have a bit of leeway...
  • Soopitup
    Soopitup reacted to DustyRusty's post in the thread BX Tires Sinking with Like Like.
    Common sense will tell you that if the ground is so wet that water is bubbling up out of it that any vehicle with tires will get stuck...
  • Soopitup
    Soopitup replied to the thread Hydraulic Top Link.
    I've found the same thing. Black seems to last longest, so I'll use different numbers of zip ties to differentiate. I like these! I'll...
  • Soopitup
    Soopitup reacted to mcmxi's post in the thread Hydraulic Top Link with Like Like.
    It's made by Outback and is available from Amazon and other places. I like it too. The kits I bought came with a 4A and 4B wrap but I...
  • Soopitup
    Soopitup replied to the thread 2 Inch Round Auger Extensions?.
    For reference, Danuser also makes a 21 inch extension. 7 inch 6080G 14 inch 6204G 21 inch 6207G
  • Soopitup
    Soopitup replied to the thread 2 Inch Round Auger Extensions?.
    Awesome! They're $150 cheaper too (for both). They should be a universal size? It only shows 1 hole in the picture, can't tell if...
  • Soopitup
    I'm looking for extensions for my SA10 Auger. 2 Inch round drive. I found the Land Pride 7 (317-040A) and 14 (317-041A) inch...
  • Soopitup
    Soopitup replied to the thread Nested Buckets.
    Thanks! I don't have room to store them all separately. The only "issue" is it requires some muscle as I have to lift the inner 2 into...
  • Soopitup
    This is my thread on installing pin on pallet forks to a SSQA loader. This should help if the pin locations are the same. However, the...
  • Soopitup
    I believe the 70 and 80 series loaders have the same pin locations but I can't verify. IF they are the same, the "difference" is in the...
  • Soopitup
    Soopitup reacted to skeets's post in the thread BX2680 fuel filter with Haha Haha.
    OH yeah I forgot that
  • Soopitup
    I was trying to figure a way to store all of my buckets out of the rain. This worked out pretty good!
    • 20240426_143031.jpg
    • 20240423_151638.jpg
  • Soopitup
    Soopitup reacted to 85Hokie's post in the thread BX2680 fuel filter with Like Like.
    Before the beverages and after you get everything hooked by up........ turn the key to hear the pump tick - hold this for 30 plus...
  • Soopitup
    Ouch, that's the worst option. If it was stuck in the "ears" it would be easier to drill out. If you want it out you may have to drill...