racer86y's latest activity
-
Rracer86y reacted to North Idaho Wolfman's post in the thread L2800 dies when engaging pto with
Like.
Or when the tornados go by... :oops: -
Rracer86y replied to the thread L2800 dies when engaging pto.I will try this when rain goes by...Thanks!!!!
-
Rracer86y replied to the thread L2800 dies when engaging pto.
-
Ryes, most likely... It might be awkward, but try engaging the PTO with the seat tilted forward... or zip tie the sensor down. I ran...
-
RYou will probably need between 200 and 600 ft-lbs to remove the nuts. Many people use a high power torque wrench or a torque multiplier...
-
Rracer86y reacted to Flintknapper's post in the thread Kubota L2800 front tires for Black Locust trees with Like.
Yes, 16" rim/wheel. (GW1 denotes the tread type) Here is a 7 x 16 size tire (for my tractor).
-
RIt does not seam to do it all the time but once it starts it will die every time i try to engage pto.I can drive forever without...
-
RI use Berryman Products tire sealer on my lawn mower, UTV, yard trailers, and bicycles. It works really well. I've read that the...
-
RHow do I get the blades off of a rc44442 mower deck? I tried taking off the plate on the top of the deck and putting a wrench on the...
-
RThanks All, I actually use my mower for everything around my 31 acre farm. I mostly mow grass and weeds but it's not unusual to grind...
-
RWhat and how you use your shredder for should be key in deciding whether to 'dress' the blades when needed (or not to). IF a person is...
-
RYep! I agree 100% with this. I cut about 30 acres over the summer months at my place and a friend's place. I have two sets of blades...
-
RInteresting discussion. In a non-professional setting never really considered sharpening a knife, chainsaw, mower blade, or much of...
-
Rracer86y replied to the thread Sharpen Rotary Mower Blades?.How do you get the blades off?Are the bolts and nuts holding blades on left handed threads?
-
RUnlike most others, I keep the blades on all of my rough-cut mowers sharp. I sharpen new blades before installation and dress with 4.5"...