Recent content by PocketDonkeyRanch

Hi everyone, I've got a great little l series 4x4 I use and abuse almost every day. We are looking to upgrade to the next level, more hp and bigger lifting capacity. I'm a mechanic and would love to stay away from electronics. What's a good m series that fits this?? Thnx Dan

Yes this makes sense. The gp wiring is fine. I'm getting 10v to the plugs. The valves are also fine. Two were actually a bit loose so I tightened them to spec. Either way I still have 300psi at the inside cylender :( Dan

Would you think the engines are the same?? Ifnit ends up being rings what do I get?? Thnx Dan

Re: L176 will not start Good call Dave. You happen to have the specs??

Re: L176 will not start Things are bad. The front cylender is 400psi and the read is 300. Looks like I have your pull the head.

Re: L176 will not start I will.do these steps and let you know. Thank you

Re: L176 will not start They are new. They should

Re: L176 will not start It's actually a 1501dt to be specific ;)

Re: L176 will not start 980h and yes

Re: L176 will not start I'm getting 9.5v to the plugs

Having major problems starting my tractor. I had the injectors tested all is good. New fuel filter/new plugs/ bled system and everything seems as it should. Injection pump???? Thnx dan

And done!!

...............

Here are a couple pics of the three point.

The gear box is toast. All the bearings are rusty and worn, and all the seals are destroyed. I have bought the bearings and the seals are ordered. The hard part is te chain is metric and is sized between a standard 50 and 60. I have bought a 60 chain and I think it might work.