newshb_k's latest activity
-
Nnewshb_k posted the thread B7100 clutch adjustment bolt - thread size in Service, Repair & Maintenance.Hi everyone, seems I lost my clutch adjustment bolt, anybody knows the thread size of the bolt? Part number is 66711-13320 I am asking...
-
Nnewshb_k replied to the thread B7100 lift unit not working.Yes, I assembled it facing wrong way…I am not sure I got mislead by a video of disassembly where it was laying down, so I assembled it...
-
NIn his video I see the push rod attached to the arm, my guess would be that he had the push rod facing the wrong way when he assembled...
-
Nnewshb_k replied to the thread B7100 lift unit not working.I have removed the 3 points hitch and found the piston in the oil 😅 seems I assembled it incorrectly now issue is fixed Thx everyone
-
-
Nnewshb_k replied to the thread B7100 lift unit not working.I I have checked and it is tight,,,I suspected it could be the piston, and when I opened the cover I didn’t see the piston, is this normal
-
Nnewshb_k replied to the thread B7100 lift unit not working.I will check that part no, I didn’t change the o-rings on the filter….but one thing to mention is that after I assembled the tractor...
-
Nnewshb_k replied to the thread B7100 lift unit not working.Thx for the reply what could be the cause of not having the flow, the pump? I have changed the oil and assured the level is ok….
-
NYou don't have any hydraulic flow. When you loosened the banjo bolt on the side of the valve, it should just be dumping fluid out at a...
-
NHi everyone I have split the tractor to change the reverse gear, and I changed the hydraulic oil, and cleaned the hydraulic filter...
