Mountainman's latest activity
-
Mountainman replied to the thread Need a loader.Travis is a legit guy and thats a steal of a price for the loader. -
Mountainman replied to the thread B6200 engine in a b7100.Ohhhh!!😂
-
@Mountainman you have been stung by dead thread posting, look at the date of post 6 then look at the date of post 7. 😜
-
Mountainman replied to the thread B6200 engine in a b7100.Thats a b219 loader. It will not directly bolt on a b6200. Subframe is one piece and would have to be extended for the longer frame of...
-
Mountainman replied to the thread Kubota BX instrument cluster replacement.Finding used BX clusters from the 50 series and newer that still work is hard. They've had some recalls and come out with newer versions...
-
Mountainman replied to the thread b2650 3 point hitch hydrolic clinder blew out part of casing.I do not unfortunately. But i will say i have seen 2 b3350 with the same exact problem lately and 1 other person looking for the same part.
-
Mountainman reacted to Russell King's post in the thread b2650 3 point hitch hydrolic clinder blew out part of casing with
Like.
Try to contact @Mountainman who runs this salvage yard listed in the first post of this thread... -
Mountainman reacted to comdirect's post in the thread b2650 3 point hitch hydrolic clinder blew out part of casing with Like.
i send an email to him thanks. hoping for a cdn source but ill take what i can get
-
Mountainman reacted to Russell King's post in the thread B7100D 3Pt Hitch Not Lowering or Raising with Like.
There is a rod from the 3 point piston to the shaft that rotates and lifts the small arms (rock shaft?) that is not really attached at...
-
Mountainman replied to the thread bx1870 instrument cluster wanted.There you go. Keeping it indoors is your best bet for saving the new cluster
-
Mountainman replied to the thread B7100D 3Pt Hitch Not Lowering or Raising.Are you saying it worked before being lifted onto your trailer? There is no down pressure so once the arms are down it will be floppy...
-
I don't have any real "insider info" but I have a "suspicion", and that is all. If my "suspicion" is correct, I would just like to say...
-
I saw this post this morning and it is a difficult one to reply to... Wishing Dan the best if such wishes are due...well, actually...
-
Mountainman replied to the thread bx1870 instrument cluster wanted.Good luck. Lots of folks in your same position. Hard to find a good used panel
-
Mountainman replied to the thread Problem removing B7100 HST engine.With all 16 frame bolts removed and hydraulic lines removed the frame and axle should seperate. Sometimes the frame is on there snug and...