Mad Mike's latest activity
-
MMad Mike replied to the thread L2250 Tachometer needle - Replacement.All, Still looking for a Tachometer needle or assembly to fit a L2250, does not need to be perfect, I just need the needle.... Anyone?
-
MMad Mike replied to the thread L2250 Tachometer needle - Replacement.My bad. And I shot Lance a note earlier... Thanks!
-
MMad Mike reacted to North Idaho Wolfman's post in the thread L2250 Tachometer needle - Replacement with
Like.
Moved thread as your looking for parts not info/advice. Send @007kubotaguy a PM and see what he has. -
MMad Mike replied to the thread L2250 Tachometer needle - Replacement.Silence?
-
MSo, over the weekend I was motoring around on the old L2250 and looked down and realized my Tach needle decided to just split and drop...
-
-
MYou can have it BRAZED and it'll hold for a few decades. Easy enough to do.
-
MContact @007kubotaguy He has used parts for some older tractors.
-
MThat engine is not really know to have issues, so I'd bet it's just a bad sensor. Throw a mechanical gauge on it and you'll know.
-
M1/8" BSPT if I remember right. For testing purposes you can get a 1/8" NPT to fit in a couple of thread turns, which is enough for a...
-
MDouble up on NIW - they should be 1/8 BSPT - which is a bit hard to come by at the local hardware store. NPT threads are very close but...
-
MOnline. Whats the thread on your gauge? Dan
-
M^^^^ When I added a digital oil pressure gauge to my Land Cruiser, I ran into that problem. Block was BSPT and sensor was 1/8" NPT...
-
MTo check the oil pressure you will need a 1/8 British pipe adapter to your gauge. Standard pipe just won't start in the hole. On larger...
-
M$8 … Brass. (Brass is good, self-sealing, and easy on the block threads.)...
-
Mgee, I looked online, oil pressure sensor is $11 US, Buy it, replace it. looks like typical sensor/switch. inside there's a rubber...
