Recent content by LoysToyz

Update on the Error Code P2414. I am still throwing the P2414 Code occasionally, but it doesn't happen nearly as often as I now disassemble and thoroughly blow out all of the cooler fins after each use. The Air Wand works wonders. Service Center said they had reset the code with their computer...

Hi William, Good Advise and I thank you for it. Dealer says, 13 days past 2 year warranty. Wouldn't ya know it. Time to invest in that expensive shop manual.

Hi Pat, Thanks for the diagram. I don't see an electrical connection in the diagram. Is it the dark spot right under the line from 120? If so, that looks like it would be inside the case of the tractor. I am still within 3 years, but I don't have much faith in my new Service Manager. There's...

Need Help. L3560HSTC and the PTO will not engage. Knob turns and locks down, PTO symbol lights up on the electronic dash. Stand up from seat and the tractor shuts off like it should, but the PTO is not turning. Any body know if we have a fuse for the PTO. Anybody know where the PTO clutch is...

Update on the Error Code P2414. I haven't thrown the code in several months. I purchased a 24 inch Air Wand that blows out of five holes near the end at a 90 degree angle. It works really well at getting between the AC cooler, HYD Fluid cooler, and Radiator to get ALL of the dust blown out...

Well I thought I had it figured out. I just needed to blow the dust out of the radiator fins occasionally, but it seems to still be an issue. I have gone to using the high pressure car wash to clear the radiator fins after every use that has excessively tall weed or excessive dust. I am still...

Well I thought I'd dust off my radiator screens and noticed that I had some buildup from tall weeds in the radiator fins. I pulled the lower shroud and all the screens up front and got in there with the air hose. Seems like I just kept blowing stuff out forever. Finally I was satisfied that it...

OK Shadow. Thank You for your input. I think I follow what you are saying. Sounds like my next logical step is to follow-up my 100 hour service with special attention to blowing and cleaning and checking radiator, condenser, oil cooler, and air filter. Is it necessary to get the code reset by...

Thanks for bringing this up as I thought they surely did the update to mine before sending it out. NOT. No tinfoil insulation anywhere in the area. and I verified that my serial number was within the numbers for the recall. Guess I'll have to address this with the dealer as well.

Hi Sheepfarmer, That could explain the EGR overheating. Since that recall was in the Fall of 2014, and I didn't get my tractor until June 2015, one would think it was updated, but after work I will look for the tinfoil insulation covering the lines to confirm.

OK Shadow, now you have my attention. Your answer has merit as I was working a 6 foot tiller hard the first time I saw the code. What's your source of information? And how do I determine if I an working the tractor above the standard? How do I reset the P2414 code with the key? Friday it...

Finally talked to my service rep and he said that ENGINE ERROR CODE P2414 in not an immediate concern. It indicates that the EGR(Exhaust Gas Recirculation) Valve read an outlying electrical code that was possibly caused by moisture condensation. He will reset the code with his laptop on my next...

Yeah, I went to my manual first, only to find that it wasn't there. My Dealers Service Rep can't even tell me whether I can ignore it.

It shows up on the digital dash. http://s484.photobucket.com/user/Loy...o2qi5.jpg.html

Ok. So I searched everywhere and I've been waiting two days for my Service Advisor to call me back. I can't seem to find a chart or anything on Error Codes. I really like my Baby Grand L3560. Did the first service at 50 hours and now I have near 100 hours on it. I was working it pretty hard bush...