jeremyzcook82's latest activity

J

jeremyzcook82 reacted to Runs With Scissors's post in the thread RGR1258 Tiller Vent Plug with Like.

https://www.hodgesmarine.com/jab17850-1012-jabsco-diy-oil-change-system-w-pump-and-35-gallo.html?srsltid=AfmBOoqYPGc7AcZUtzKXfrQ9dtOxe94P...

Apr 16, 2025
J

jeremyzcook82 reacted to chim's post in the thread RGR1258 Tiller Vent Plug with Like.

I've seen vents with filtering material that made them appear to be plugged. They don't need to pass large volumes. Check sintered vent...

Apr 16, 2025
J

jeremyzcook82 replied to the thread RGR1258 Tiller Vent Plug.

It sort of looks like that but more like an umbrella because the sides are crimped inward. I don’t see a hole in the bottom of it when I...

Apr 16, 2025
J

jeremyzcook82 reacted to chim's post in the thread RGR1258 Tiller Vent Plug with Like.

I have no experience with that equipment, but was curious enough to look around a bit. If this is the type of vent you have, it wears a...

Apr 16, 2025
J

jeremyzcook82 reacted to GreensvilleJay's post in the thread RGR1258 Tiller Vent Plug with Like.

Here's a 'street elbow', you'll need 2 of them. Simply remove the 'vent plug' (#31 in the parts diagram...) and take to local 'plumbing...

Apr 16, 2025
J

jeremyzcook82 reacted to Russell King's post in the thread RGR1258 Tiller Vent Plug with Like.

There are many different types of vent plugs and some are more weatherproof than others. You could try to change it to something like...

Apr 15, 2025
J

jeremyzcook82 replied to the thread RGR1258 Tiller Vent Plug.

I checked the gasket but not the shaft seal. I use the recommended oil from the manual, 80-90. Yes I check the sight glass before each...

Apr 15, 2025
J

jeremyzcook82 replied to the thread RGR1258 Tiller Vent Plug.

Yours has been the first helpful comment. Thank you very much for the advice. What kind of pipe? And will I have to put anything on the...

Apr 15, 2025
J

jeremyzcook82 replied to the thread RGR1258 Tiller Vent Plug.

Yes, I should probably build something to store my equipment in. I wouldn’t wanna keep it like the dealership does for years sitting...

Apr 15, 2025
J

jeremyzcook82 replied to the thread RGR1258 Tiller Vent Plug.

Mine doesn’t have a drain plug on it. It only has the fill plug/vent plug up top. It has a site window on the side of the cover. So in...

Apr 15, 2025
J

jeremyzcook82 replied to the thread RGR1258 Tiller Vent Plug.

It is stored outside. Yes, I am putting the 6 pints / 3 qts in the gear case. The one that is on the side of the tiller, not the gear...

Apr 15, 2025
J

jeremyzcook82 posted the thread RGR1258 Tiller Vent Plug in Implements & Attachments.

The past couple times I have used my RGR1258 tiller, I have noticed the gear oil looked milky white. The first time I noticed it, I...

Apr 14, 2025

Show older items

Top Bottom