JasonW's latest activity
-
JJasonW replied to the thread L3301 HST cranks, starts briefly then stalls.Well if it stays running as long as you hold the key in the start position and shuts off when it’s returned to the run position. Test...
-
JJasonW replied to the thread L3301 HST cranks, starts briefly then stalls.What part of Alabama are you in? Anywhere in Alabama currently you shouldn’t have fuel gelling. I’m leaning towards something electrical.
-
JJasonW replied to the thread In search of a better truck for towing the M6060 and folding cutter..I have the same kit for mine. Scored it used probably a year before I even had a gooseneck trailer. It’s nice to have the handle so you...
-
JJasonW replied to the thread L3301 HST cranks, starts briefly then stalls.How long would it stay running if you held the key in the start position? Does it run smooth when it is running? Did your filters look...
-
JJasonW replied to the thread Rear Hydraulics.Well to follow up I went with the summit hydraulics 4 circuit diverter. Got it installed today but still need to get some hydraulic...
-
JJasonW replied to the thread Anyone with experience with a 8-ft wide heavy-duty box blade with hydraulic rippers.I bought it used a few weeks ago. And made a 8 hour round trip to pick it up. Facebook marketplace, Craigslist. And sometimes...
-
JJasonW replied to the thread Rear remotes leaking.I would say yes and no. Ran it some tilling up the garden and one was almost pouring fluid. Disconnected the hoses and found a piece of...
-
-
JJasonW replied to the thread Anyone with experience with a 8-ft wide heavy-duty box blade with hydraulic rippers.Just looked on their website, not seeing any with hydraulic rippers, they have some that are nice and heavy but they are over $8k.
-
JJasonW replied to the thread Anyone with experience with a 8-ft wide heavy-duty box blade with hydraulic rippers.Landpride, and Woods/Gannon make heavy duty ones. I recently purchased a used Rhino 7’ not sure if they still make new ones. Most...
-
-
JJasonW replied to the thread Rear remotes leaking.I thought I was going to have to use the grease trick but I just stood it up on end and they fall on place.
-
JJasonW replied to the thread Rear remotes leaking.Got this done today. Pretty simple just need a vise. The Kubota seal kit only had one rubber o-ring and one nylon o-ring that goes on...
-
-
JJasonW replied to the thread Best way to give tractor a good wash?.I have the same grease caps from LockNLube, use them on everything that has a grease fitting.
-
JJasonW replied to the thread Best way to give tractor a good wash?.I have also used wax on mine. My point was I wouldn’t make it look like it had never been greased. I’ve seen some tractors with hundreds...
-
JJasonW replied to the thread Rear remotes leaking.From what I found for my model the thread is 3/8 BSPP. Through the dealer they are a little over $100. I received the seal kits from the...
-
JJasonW replied to the thread Best way to give tractor a good wash?.Kroil or WD-40 to wipe off the excess. You don’t want to wash the grease from where it’s supposed to be. After it’s washed grease...
