FlatlandTransplant's latest activity
-
FFlatlandTransplant replied to the thread Hydraulic angle landscape rake.Video of the trial run.
-
FFlatlandTransplant replied to the thread Hydraulic angle landscape rake.Have her a trial run today and it seems to work good! Going to put a restrictor in one of the lines though because at mid throttle or...
-
-
FFlatlandTransplant replied to the thread Thoughts on main hydraulic pump worn out vs individual cylinder seals bad.The pump does not supply pressure to hold the cylinders in place. The control valves hold the fluid in the cylinders which holds them...
-
FFlatlandTransplant replied to the thread Hydraulic angle landscape rake.That is just a 1" bolt that I happened to have and used the spacer so I could clamp that weldment together as I welded it in place...
-
FFlatlandTransplant replied to the thread Hydraulic angle landscape rake.I have another sitting on the shelf right now to do exactly that!
-
FAfter adding the summit hydraulics electric remote kit to my B8200 I decided I should make use of the extra rear remotes I now have. So...
-
-
FFlatlandTransplant replied to the thread YATF.Thanks! Wow those guys are pretty proud of their tubing. I saw that McMaster has the same diameter and wall thickness for cheaper, I...
-
FFlatlandTransplant replied to the thread YATF.Hey Dan, do you mind sharing your source for the steel tubing?
-
FFlatlandTransplant replied to the thread B8200 ? Loader type. Hookup..My 8200 had a bf350 mounted on it when I bought it. So that is another option if you find one used.
-
FFlatlandTransplant replied to the thread Aftermarket FEL SSQA.I was able to buy the ssqa for a different loader and it fit my bf350 from kubota for $550. Someone else had measured their loader and...
