Firstgear's latest activity
-
FFirstgear reacted to DustyRusty's post in the thread Kubota Transmission Filter & Fluid Change with
Like.
If that pan has your hydraulic oil in it, then I would be sending a sample out for analysis. That certainly doesn't look right to me. -
FFirstgear reacted to nbryan's post in the thread Kubota Transmission Filter & Fluid Change with Like.
I mentioned to my Kubota dealership service manager (it's a pretty big Kubota dealership) about insisting on changing the SUDT oil at 50...
-
FFirstgear reacted to Cranblue's post in the thread Kubota Transmission Filter & Fluid Change with Like.
L series very little fluid loss on Transmission filter or Hydraulic on left side that is longer with a magnet ring for metal.I had...
-
FFirstgear reacted to Cranblue's post in the thread Kubota Transmission Filter & Fluid Change with Like.
My L4701 I changed hydraulic filter at 50hr and fluid at 400 hr and obviously another hydro filter and transmission filter per owners...
-
FThe filters that are installed from the factory have part numbers, physical size difference, and one is marked "suction". Simply match...
-
FFirstgear reacted to D2Cat's post in the thread Kubota Transmission Filter & Fluid Change with Like.
Orange Man, welcome to the forum. The 50 hour fluid change seems early, but the purpose is to clear out any "casting crumbs" from...
-
FFirstgear reacted to Tarmy's post in the thread Where to buy driveway gates compatible with electric openers? with Like.
In snow country consider using a sliding gate…less digging…ask me how I know. I built my own. 26’ clear span, no rollers to clog up...
-
FDoes anyone know if the battery can be charged via the cigarette lighter? My Polaris RZR maintains the battery through the cigarette...
-
FIf you’re considering wheel weights OR liquid ballast (as opposed to doing both) check the difference between max lb of wheel weights v...
-
FRim guard and some ballast does wonders. Most of the time I'm just running without the ballast, I feel like for general work its fine...
-
FFirstgear replied to the thread Pucker moment.Yes, but I couldn’t put it any lower and not drag which I didn’t want to do.
-
FWoo! Wild ride eh? Fill the tires. I cannot think of a reason not to. Not only does it help keep your rear end down, it will take stress...
-
FOther than damaging my tractor, lifting the front or rear a little EVENLY does not scare me, But tilting certainly does. Also, being the...
-
Fre: can't believe that the dealerships don't offer a basic safety course or instruction to new tractor owners. did the salesguy where...
-
FMy first tractor was a L3301 without filled tires or weights. My property is about as flat as it gets. Still I had more than one pucker...